|
API: 15-129-21576
Operator: HARRIS OIL & GAS COMPANY Field: Kinsler Lease: Breeding Well 1-715 |
Location: T32S R40W, Sec. 15, NE SW NE
1650 South, 1650 West, from NE corner Longitude: -101.6517351 Latitude: 37.267918 County: Morton Status: GAS |
Spud Date: 20-DEC-98
Completion Date: 24-JAN-99 Plugging Date: Total Depth: 5700 Form. at depth: MISSISSIPPIAN Elevation: 3340 KB |
| elog mismarked field Richfield, 3339 KB. --CB 7/13/01 DST #1 mismarked 3334 KB. --cb 11/13/01 | ||
| Test Number: 2 | Data Source: TRILOBITE |
|
Interval: 5420 to 5570
Formation tested: Keyes | Date, Time: 04-JAN-99; 20:47:07 |
|
Initial Hydro Pressure: 2647 PSI
First Initial Flow Pressure: 43 PSI First Final Flow Pressure: 66 PSI Initial Shut-in Pressure: PSI Second Initial Flow Pressure: PSI Second Final Flow Pressure: PSI Final Shut-in Pressure: PSI Final Hydro Pressure: 2582 PSI |
Tool Data Hole Size: 7.78 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 552 ft. Drill Pipe Length: 4867 ft. |
| Weak 1/2"", built to 3 1/2"" in bucket. 30 min. I.F.P. Would not rotate. Tried pulling loose. Wall-stuck. Dropped bar after 1 hr. 5 min. flow period. Cir. mud, wait on oil Oil arrived about 3:30 A.M. Spotted 60 bbl. At 1:15 pm. spotted another 70 bbl Di-alog out at 5:00 pm. Wall-stuck 90 ft. above tool. Backed off, came out of hole, picked up jars, went back in & jarred loose. 2:30 AM. 1-6-99. | |
|
Bottom Hole Temperature: 135 DEG F
Percent Porosity: 18 Samples: None Gas Recovery: Comments: | |
|
Recovery 60 of Total Fluid 60 of Fluid in Drill Collars 60 of Mud 920 of Salinity (PPM) | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 3 | Data Source: TRILOBITE |
|
Interval: 5415 to 5570
Formation tested: Keyes | Date, Time: 06-JAN-99; 16:55:46 |
|
Initial Hydro Pressure: 2463 PSI
First Initial Flow Pressure: 45 PSI First Final Flow Pressure: 59 PSI Initial Shut-in Pressure: 175 PSI Second Initial Flow Pressure: 66 PSI Second Final Flow Pressure: 76 PSI Final Shut-in Pressure: 220 PSI Final Hydro Pressure: 2447 PSI |
Tool Data Hole Size: 7.78 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 506 ft. Drill Pipe Length: 4896 ft. |
|
Initial Flow: Weak 1"" built to 2 1/4"" in 8 minutes. Stabilized Initial Shutin: No blow back Final Flow: Surface blow built to 4"" in 60 min Final Shutin: No blow back Remark: Had 492' drill collars plus Weatherfords Jars & subs 14' Total 506'. Ran jars 120' above tool. At 5295' |
|
|
Bottom Hole Temperature: 134 DEG F
Percent Porosity: 18 Samples: None Gas Recovery: Comments: | |
|
Recovery 120 of Total Fluid 120 of Fluid in Drill Collars 590 of Gas in pipe 120 of Oil & Gas cut Mud 8%Gas 7%Oil 85%Mud 900 of Salinity (PPM) | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 4 | Data Source: TRILOBITE |
|
Interval: 5170 to 5410
Formation tested: Morrow | Date, Time: 07-JAN-99; 08:02:15 |
|
Initial Hydro Pressure: 2340 PSI
First Initial Flow Pressure: 62 PSI First Final Flow Pressure: 80 PSI Initial Shut-in Pressure: 481 PSI Second Initial Flow Pressure: 84 PSI Second Final Flow Pressure: 113 PSI Final Shut-in Pressure: 540 PSI Final Hydro Pressure: 2318 PSI |
Tool Data Hole Size: 7.78 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 506 ft. Drill Pipe Length: 4647 ft. |
|
Initial Flow: Fair 2"" built to 9"" in 15 minutes Initial Shutin: Strong - bottom of bucket blow back Final Flow: Strong immediatley. Gas to surface in 47 minutes. Gauged 15,500 cf/d Final Shutin: 1"" blow back Remark: Gas burned |
|
|
Bottom Hole Temperature: 135 DEG F
Percent Porosity: 8 Samples: None Gas Recovery: Comments: | |
|
Recovery 215 of Total Fluid 215 of Fluid in Drill Collars 4938 of Gas in pipe 95 of Oil cut Mud 22%Oil 78%Mud 120 of Oil cut Gassy Mud 25%Gas 10%Oil 65%Mud 860 of Salinity (PPM) | |
| View Pressures | View Recovery Gas |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 1 | Data Source: TRILOBITE |
|
Interval: 3240 to 3298
Formation tested: | Date, Time: 28-DEC-98; 17:52:37 |
|
Initial Hydro Pressure: 1567 PSI
First Initial Flow Pressure: 35 PSI First Final Flow Pressure: 160 PSI Initial Shut-in Pressure: 557 PSI Second Initial Flow Pressure: 167 PSI Second Final Flow Pressure: 298 PSI Final Shut-in Pressure: 559 PSI Final Hydro Pressure: 1554 PSI |
Tool Data Hole Size: 7.875 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.5 in. Drill Collar Length: 552 ft. Drill Pipe Length: 2712 ft. |
|
Initial Flow: 1/4"" at open built to 11"" Initial Shut-in: Bleed off for 1 1/2 mins. no return Final Flow: Weak surface blow in 3 mins. built to 10"" Final Shut-in: Bleed off for 1 min. no return |
|
|
Bottom Hole Temperature: 100 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 572 of Total Fluid 552 of Fluid in Drill Collars 20 of Fluid in Drill Pipe 90 of slitly water cut mud 10%w 90%m 120 of watery mud 30%w 70%m 120 of muddy water 65%w 35%m 242 of water 100%w 28000 of Salinity (PPM) | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |