|
API: 15-009-24638
Operator: Maxwell Operating Co., Inc. Field: Beaver North Lease: Ross Well 1 |
Location: T16S R12W, Sec. 4, S2 NW NE
4290 North, 1980 West, from SE corner Longitude: -98.652433 Latitude: 38.6931583 County: Barton Status: OIL |
Spud Date: 07/23/1997
Completion Date: 07/30/1997 Plugging Date: Total Depth: 3332 Form. at depth: PENNSYLVANIAN BASAL CONGLOMERATE Elevation: 1877 KB |
| Test Number: 1 | Data Source: TRILOBITE |
|
Interval: 2892 to 2931
Formation tested: Topeka | Date, Time: 07/27/1997; 18:06:06 |
|
Initial Hydro Pressure: 1386 PSI
First Initial Flow Pressure: 22 PSI First Final Flow Pressure: 38 PSI Initial Shut-in Pressure: 323 PSI Second Initial Flow Pressure: 42 PSI Second Final Flow Pressure: 50 PSI Final Shut-in Pressure: 208 PSI Final Hydro Pressure: 1376 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 30 ft. Drill Pipe Length: 2855 ft. |
|
Initial Flow- strong blow--bottom of bucket in 45 seconds --- then decreased to fair blow at end of flow Initial Shutin- surface blow---died in 2 minutes Final Flow- strong blow --bottom ofbucket in 45 seconds----then decreased to fair blow at end (same as initial) Final Shutin- no blow |
|
|
Bottom Hole Temperature: 103 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 100 of Total Fluid 30 of Fluid in Drill Collars 70 of Fluid in Drill Pipe 600 of Gas in pipe 30 of Gassy Mud & Water Cut Oil 70 of Gassy Mud & Water Cut Oil 26000 of Salinity (PPM) | |
| View Pressures | No Recovery Gas data. |
| Test Number: 2 | Data Source: TRILOBITE |
|
Interval: 3068 to 3090
Formation tested: Kansas City 'C' | Date, Time: 07/28/1997; 15:41:36 |
|
Initial Hydro Pressure: 1486 PSI
First Initial Flow Pressure: 15 PSI First Final Flow Pressure: 21 PSI Initial Shut-in Pressure: 81 PSI Second Initial Flow Pressure: 17 PSI Second Final Flow Pressure: 20 PSI Final Shut-in Pressure: PSI Final Hydro Pressure: 1476 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 30 ft. Drill Pipe Length: 3036 ft. |
|
Initial Flow- weak 1/4"" blow decreasing to surface blow. Initial Shutin- no blow Final Flow- 1"" blow decreasing to 1/4"" in 10 minutes Final Shutin- none taken |
|
|
Bottom Hole Temperature: 102 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 20 of Total Fluid 20 of Fluid in Drill Collars 30 of Gas in Pipe 20 of Slightly Oil specked Mud | |
| View Pressures | No Recovery Gas data. |
| Test Number: 3 | Data Source: TRILOBITE |
|
Interval: 3091 to 3142
Formation tested: Kansas City | Date, Time: 07/29/1997; 03:41:51 |
|
Initial Hydro Pressure: 1517 PSI
First Initial Flow Pressure: 136 PSI First Final Flow Pressure: 287 PSI Initial Shut-in Pressure: 467 PSI Second Initial Flow Pressure: 297 PSI Second Final Flow Pressure: 384 PSI Final Shut-in Pressure: 470 PSI Final Hydro Pressure: 1485 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 30 ft. Drill Pipe Length: 3067 ft. |
|
Initial Flow- strong blow building to bottom of bucket in 1 minute Initial Shutin- blow built to 7"" Final Flow- 1"" blow decreasing to 1/4"" in 10 minutes Final Shutin- gas to surface at beginning of shutin blow built to bottom in 5 min |
|
|
Bottom Hole Temperature: 111 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 960 of Total Fluid 30 of Fluid in Drill Collars 930 of Fluid in Drill Pipe 150 of Gassy Mud 10%gas 90%mud 150 of Gassy Oil & Mud Cut Water 180 of Gassy Oil & Mud Cut Water 180 of Salt Water 47000 of Salinity (PPM) | |
| View Pressures | No Recovery Gas data. |