|
API: 15-081-21103
Operator: Berexco, Inc. Field: Eubank South Lease: Summers Well 1-28 |
Location: T29S R34W, Sec. 28, NW SE NE
3314 North, 1156 West, from SE corner Longitude: -101.0384551 Latitude: 37.4986283 County: Haskell Status: OIL |
Spud Date: 03-MAR-97
Completion Date: 25-MAR-97 Plugging Date: Total Depth: 5695 Form. at depth: ST. LOUIS LIMESTONE Elevation: 2984 KB |
| Test Number: 1 | Data Source: TRILOBITE |
|
Interval: 5284 to 5364
Formation tested: Morrow-Chester | Date, Time: 13-MAR-97; 07:20:24 |
|
Initial Hydro Pressure: 2563 PSI
First Initial Flow Pressure: 30 PSI First Final Flow Pressure: 33 PSI Initial Shut-in Pressure: 117 PSI Second Initial Flow Pressure: 36 PSI Second Final Flow Pressure: 47 PSI Final Shut-in Pressure: 360 PSI Final Hydro Pressure: 2520 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 618 ft. Drill Pipe Length: 4699 ft. |
|
Initial Flow: Initial Shut In: No return Final Flow: .5"" blow at open, slow build to 6.5 Final Shut In: Weak return in 10 min, built to .5"" died in 63 min. |
|
|
Bottom Hole Temperature: 126 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 50 of Total Fluid 50 of Fluid in Drill Collars 50 of Slightly Gassy Drilling Mud 310 of Gas in pipe | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 2 | Data Source: TRILOBITE |
|
Interval: 5368 to 5401
Formation tested: 1st Chester sand | Date, Time: 14-MAR-97; 05:32:05 |
|
Initial Hydro Pressure: 2742 PSI
First Initial Flow Pressure: 42 PSI First Final Flow Pressure: 102 PSI Initial Shut-in Pressure: 1404 PSI Second Initial Flow Pressure: 92 PSI Second Final Flow Pressure: 120 PSI Final Shut-in Pressure: 1372 PSI Final Hydro Pressure: 2648 PSI |
Tool Data Hole Size: 7.875 in. Drill Collar ID: in. Drill Pipe ID: in. Drill Collar Length: 618 ft. Drill Pipe Length: 4726 ft. |
|
Initial Flow: Surface blow built to 4""in. Initial Shut In: No return Final Flow: 1"" blow at open, built to 5.5"" Final Shut In: No return |
|
|
Bottom Hole Temperature: 131 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 210 of Total Fluid 210 of Fluid in Drill Collars 120 of Slightly Gassy Mud 90 of Gassy Oil Cut Mud 408 of Gas in pipe | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 3 | Data Source: TRILOBITE |
|
Interval: 5406 to 5447
Formation tested: Chester | Date, Time: 15-MAR-97; 05:13:12 |
|
Initial Hydro Pressure: 2639 PSI
First Initial Flow Pressure: 286 PSI First Final Flow Pressure: 534 PSI Initial Shut-in Pressure: 760 PSI Second Initial Flow Pressure: 549 PSI Second Final Flow Pressure: 708 PSI Final Shut-in Pressure: 767 PSI Final Hydro Pressure: 2540 PSI |
Tool Data Hole Size: 7.875 in. Drill Collar ID: in. Drill Pipe ID: in. Drill Collar Length: 618 ft. Drill Pipe Length: 4789 ft. |
|
Initial Flow: Bottom of bucket in 5 min Initial Shut In: Return in 2 min, built to bottom of bucket in 16 minutes Final Flow: Bottom of bucket at open, gas to surface in 28 min, to weak to gauge Final Shut In: Bled off blow for 68 min, reutrn in 1/2 min, built to bottom of bucket in 10 minutes. |
|
|
Bottom Hole Temperature: 134 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 1630 of Total Fluid 618 of Fluid in Drill Collars 1012 of Fluid in Drill Pipe 60 of Gas Oil Cut Mud 300 of Clean Gassy Oil 570 of Gas Oil Cut Watery Mud 700 of Salt Water 70000 of Salinity (PPM) 39.5 of Gravity (API) | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 4 | Data Source: TRILOBITE |
|
Interval: 5468 to 5486
Formation tested: Chester | Date, Time: 16-MAR-97; 07:08:03 |
|
Initial Hydro Pressure: 2607 PSI
First Initial Flow Pressure: 151 PSI First Final Flow Pressure: 600 PSI Initial Shut-in Pressure: 1314 PSI Second Initial Flow Pressure: 626 PSI Second Final Flow Pressure: 993 PSI Final Shut-in Pressure: 1301 PSI Final Hydro Pressure: 2465 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: in. Drill Pipe ID: in. Drill Collar Length: 618 ft. Drill Pipe Length: 4850 ft. |
|
Initial Flow: Bottom of bucket in 4 min Initial Shut In: Return in 26 min, built to 1/4"" Final Flow: 1/4"" at open, built to bottom of bucket in 5 min Final Shut In: Return in 19 min, built to 1.5"" |
|
|
Bottom Hole Temperature: 139 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 2148 of Total Fluid 618 of Fluid in Drill Collars 1530 of Fluid in Drill Pipe 150 of Mud Cut Water 1998 of Salty Sulfer Water 56000 of Salinity (PPM) | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |