Drill Stem Tests Database
Specific Well--15-033-21011
API: 15-033-21011
Operator: Hummon Corp.
Field: Nescatunga
Lease: Beeley
Well 1
Location: T32S R18W, Sec. 23, S2 SW SW
330 North, 4620 West, from SE corner
Longitude: -99.2525366
Latitude: 37.2383183
County: Comanche
Status: O&G
Spud Date: 14-JUN-99
Completion Date: 30-JUN-99
Plugging Date:
Total Depth: 5900
Form. at depth: ALTAMONT
Elevation: 2088 KB
all Log-Tech elogs, Drill Time & Sample originally mismarked 2085 KB. --cb 1/28/02
Test Number: 1 Data Source: TRILOBITE
Interval: 3567 to 3585
Formation tested: Stotler
Date, Time: 19-JUN-99; 00:42:43
Initial Hydro Pressure: 1628 PSI
First Initial Flow Pressure: 33 PSI
First Final Flow Pressure: 89 PSI
Initial Shut-in Pressure: 1246 PSI
Second Initial Flow Pressure: 60 PSI
Second Final Flow Pressure: 143 PSI
Final Shut-in Pressure: 1222 PSI
Final Hydro Pressure: 1621 PSI
Tool Data
Hole Size: 7.875 in.
Drill Collar ID: 2.25 in.
Drill Pipe ID: 3.8 in.
Drill Collar Length: 300 ft.
Drill Pipe Length: 3270 ft.
Initial Flow: Strong blow bottom of bucket in 5 secs. gas to surface in 18 mins. Initial Shut-in: Weak blow. (1/2"")
Final Flow: Strong blow (see gas volume report) 10""
Final Shut-in: Weak blow (1 - 2"")
Bottom Hole Temperature: 101 DEG F
Percent Porosity: 14
Samples: Gas sample
Gas Recovery:
Comments:
Recovery
315 of Total Fluid
300 of Fluid in Drill Collars
15 of Fluid in Drill Pipe
75 of Gas and water cut mud
60 of Muddy water 60% water 40% mud
180 of Muddy water 93% water 7% mud
169000 of Salinity (PPM)
View Pressures View Recovery Gas
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display.
 
Test Number: 4 Data Source: TRILOBITE
Interval: 5149 to 5200
Formation tested: Miss.
Date, Time: 24-JUN-99; 14:21:13
Initial Hydro Pressure: 2547 PSI
First Initial Flow Pressure: 25 PSI
First Final Flow Pressure: 40 PSI
Initial Shut-in Pressure: 360 PSI
Second Initial Flow Pressure: 40 PSI
Second Final Flow Pressure: 56 PSI
Final Shut-in Pressure: 338 PSI
Final Hydro Pressure: 2470 PSI
Tool Data
Hole Size: 7.875 in.
Drill Collar ID: 2.25 in.
Drill Pipe ID: 3.8 in.
Drill Collar Length: 300 ft.
Drill Pipe Length: 4835 ft.
Initial Flow: Weak to fair blow slow increase to 10"" Initial Shut-in: No blow.
Final Flow: Weak blow slow increase to 5""
Final Shut-in: No blow
Bottom Hole Temperature: 118 DEG F
Percent Porosity: 15
Samples: none
Gas Recovery:
Comments:
Recovery
70 of Total Fluid
70 of Fluid in Drill Collars
150 of Gas in pipe.
70 of Slight oil and gas cut mud
6000 of Salinity (PPM)
View Pressures No Recovery Gas data.
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display.
 
Test Number: 5 Data Source: TRILOBITE
Interval: 5577 to 5630
Formation tested: Viola
Date, Time: 26-JUN-99; 15:17:21
Initial Hydro Pressure: 2713 PSI
First Initial Flow Pressure: 975 PSI
First Final Flow Pressure: 212 PSI
Initial Shut-in Pressure: 1780 PSI
Second Initial Flow Pressure: 725 PSI
Second Final Flow Pressure: 172 PSI
Final Shut-in Pressure: 1868 PSI
Final Hydro Pressure: 2672 PSI
Tool Data
Hole Size: 7.875 in.
Drill Collar ID: 2.25 in.
Drill Pipe ID: 3.8 in.
Drill Collar Length: 300 ft.
Drill Pipe Length: 5275 ft.
Initial Flow: Strong blow gas to surface in 1.5 mins. (see gas volume report) Initial Shut-in: No blow.
Final Flow: Strong blow (see gas volume report)
Final Shut-in: Weak blow 1/2 - 1""
Bottom Hole Temperature: 139 DEG F
Percent Porosity: 16
Samples: Gas sample
Gas Recovery:
Comments:
Recovery
20 of Total Fluid
20 of Fluid in Drill Collars
20 of Drilling mud
7000 of Salinity (PPM)
View Pressures View Recovery Gas
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display.
 
Test Number: 6 Data Source: TRILOBITE
Interval: 5630 to 5652
Formation tested: Viola
Date, Time: 27-JUN-99; 09:38:43
Initial Hydro Pressure: 2764 PSI
First Initial Flow Pressure: 871 PSI
First Final Flow Pressure: 986 PSI
Initial Shut-in Pressure: 1986 PSI
Second Initial Flow Pressure: 852 PSI
Second Final Flow Pressure: 1020 PSI
Final Shut-in Pressure: 1983 PSI
Final Hydro Pressure: 2712 PSI
Tool Data
Hole Size: 7.875 in.
Drill Collar ID: 2.25 in.
Drill Pipe ID: 3.8 in.
Drill Collar Length: 300 ft.
Drill Pipe Length: 5339 ft.
Initial Flow; Strong blow gas to surface in 1.5 mins. (see gas volume report) oil to surface in 16 mins. heavy spary Initial Shut-in: Strong blow
Final Flow: Strong blow. Oil to surface in 5 mins.Good 2"" stream for 3-4 mins. then back to gas & oil spray.
Final Shut-in: Strong blow.
Bottom Hole Temperature: 131 DEG F
Percent Porosity: 20
Samples: none
Gas Recovery:
Comments:
Recovery
800 of Total Fluid
300 of Fluid in Drill Collars
500 of Fluid in Drill Pipe
500 of Clean gassy oil. 20% gas 80% oil
300 of Gassy Oil cut mud
7000 of Salinity (PPM)
View Pressures View Recovery Gas
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display.
 
Test Number: 7 Data Source: TRILOBITE
Interval: 5659 to 5674
Formation tested: Viola
Date, Time: 28-JUN-99; 04:03:30
Initial Hydro Pressure: 2766 PSI
First Initial Flow Pressure: 83 PSI
First Final Flow Pressure: 297 PSI
Initial Shut-in Pressure: 1944 PSI
Second Initial Flow Pressure: 322 PSI
Second Final Flow Pressure: 475 PSI
Final Shut-in Pressure: 1989 PSI
Final Hydro Pressure: 2721 PSI
Tool Data
Hole Size: 7.875 in.
Drill Collar ID: 2.25 in.
Drill Pipe ID: 3.8 in.
Drill Collar Length: 300 ft.
Drill Pipe Length: 5367 ft.
Initial Flow: Strong blow bottom of bucket in 1 min. Initial Shut-in: Weak blow. (1/2"")
Final Flow: Fair to strong blow bottom of bucket in 11 mins.
Final Shut-in: No blow
Bottom Hole Temperature: 138 DEG F
Percent Porosity: 16
Samples: none
Gas Recovery:
Comments:
Recovery
960 of Total Fluid
300 of Fluid in Drill Collars
660 of Fluid in Drill Pipe
190 of Gas in pipe.
50 of Gassy oil cut mud
125 of Slight oil cut muddy water
785 of Salt water
98000 of Salinity (PPM)
View Pressures No Recovery Gas data.
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display.
 
Test Number: 2 Data Source: TRILOBITE
Interval: 4987 to 5004
Formation tested: Altamont
Date, Time: 12-JUN-99; 19:13:28
Initial Hydro Pressure: 2449 PSI
First Initial Flow Pressure: 87 PSI
First Final Flow Pressure: 52 PSI
Initial Shut-in Pressure: 1794 PSI
Second Initial Flow Pressure: 70 PSI
Second Final Flow Pressure: 43 PSI
Final Shut-in Pressure: 1738 PSI
Final Hydro Pressure: 2378 PSI
Tool Data
Hole Size: 7.875 in.
Drill Collar ID: 2.25 in.
Drill Pipe ID: 3.8 in.
Drill Collar Length: 300 ft.
Drill Pipe Length: 4678 ft.
Initial Flow: Strong blow gas to surface in 3 mins. (see gas volume report) Initail Shut-in: No blow.
Final Flow: Strong blow (see gas volume report)
Final Shut-in: No blow
Bottom Hole Temperature: 109 DEG F
Percent Porosity: 14
Samples: Gas sample
Gas Recovery:
Comments:
Recovery
4978 of Gas in pipe
View Pressures View Recovery Gas
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display.
 
Test Number: 3 Data Source: TRILOBITE
Interval: 5012 to 5074
Formation tested: Pawnee/Ft.Scott
Date, Time: 23-JUN-99; 16:22:14
Initial Hydro Pressure: 2470 PSI
First Initial Flow Pressure: 26 PSI
First Final Flow Pressure: 45 PSI
Initial Shut-in Pressure: 1632 PSI
Second Initial Flow Pressure: 38 PSI
Second Final Flow Pressure: 40 PSI
Final Shut-in Pressure: 1635 PSI
Final Hydro Pressure: 2439 PSI
Tool Data
Hole Size: 7.875 in.
Drill Collar ID: 2.25 in.
Drill Pipe ID: 3.8 in.
Drill Collar Length: 300 ft.
Drill Pipe Length: 4708 ft.
Initial Flow: Strong blow bottom of bucket in 2.5 mins. Initial Shut-in: Weak blow. (1/2"")
Final Flow: Strong blow gas to surface in 4 mins. (see gas volume report)
Final Shut-in: No blow
Bottom Hole Temperature: 126 DEG F
Percent Porosity: 11
Samples: Gas sample
Gas Recovery:
Comments:
Recovery
60 of Total Fluid
60 of Fluid in Drill Collars
60 of Drilling mud
6000 of Salinity (PPM)
View Pressures View Recovery Gas
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display.