API: 15-189-22312
Operator: Oxy USA, Inc. Field: Youngren North Lease: MLP CAVNER 'C' Well 1 |
Location: T31S R38W, Sec. 31, SW NE NW SE
2147 North, 1975 West, from SE corner Longitude: -101.49048 Latitude: 37.3068 County: Stevens Status: SWD |
Spud Date: 07-AUG-99
Completion Date: 25-AUG-99 Plugging Date: Total Depth: 6150 Form. at depth: ST LOUIS Elevation: 3122 KB |
Test Number: 1 | Data Source: TRILOBITE |
Interval: 57540 to 5790
Formation tested: Chester | Date, Time: 21-AUG-99; 14:38:34 |
Initial Hydro Pressure: 2689 PSI
First Initial Flow Pressure: 23 PSI First Final Flow Pressure: 64 PSI Initial Shut-in Pressure: 1587 PSI Second Initial Flow Pressure: 74 PSI Second Final Flow Pressure: 100 PSI Final Shut-in Pressure: 1556 PSI Final Hydro Pressure: 2648 PSI |
Tool Data Hole Size: 7.78 in. Drill Collar ID: 2.23 in. Drill Pipe ID: 3.38 in. Drill Collar Length: 593 ft. Drill Pipe Length: 5149 ft. |
Initial Flow: Weak blow built to 4"" Initial Shut-in: No blow back Final Flow: Weak surface blow 1/8"" died out |
|
Bottom Hole Temperature: 140 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
Recovery 120 of Total Fluid 120 of Fluid in Drill Collars 60 of Mud 100% 60 of Watery mud 20% water 80% mud 34000 of Salinity (PPM) | |
View Pressures | No Recovery Gas data. |
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
Test Number: 2 | Data Source: TRILOBITE |
Interval: 6042 to 6060
Formation tested: St. Louis | Date, Time: 24-AUG-99; 10:20:33 |
Initial Hydro Pressure: 2824 PSI
First Initial Flow Pressure: 311 PSI First Final Flow Pressure: 835 PSI Initial Shut-in Pressure: 1344 PSI Second Initial Flow Pressure: 864 PSI Second Final Flow Pressure: 1247 PSI Final Shut-in Pressure: 1349 PSI Final Hydro Pressure: 2811 PSI |
Tool Data Hole Size: 7.78 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 593 ft. Drill Pipe Length: 5427 ft. |
Initial Flow: Slid 5' 6"" blow to strong off bottom of bucket in 90 secs. craded 2"" Initial Shut-in: Strong OBB blow-back. Final Flow: Strong OBB in 2 min. Cracked 2"". Final Shut-in: Strong OBB blow-back. Remarks: 12 ft. of pay. held. |
|
Bottom Hole Temperature: 156 DEG F
Percent Porosity: 8 Samples: None Gas Recovery: Comments: | |
Recovery 2800 of Total Fluid 593 of Fluid in Drill Collars 2207 of Fluid in Drill Pipe 2630 of Gas in pipe 215 of Clean Gassy Oil 35% Gas 65% Oil 125 of Mud & Water cut Gassy Oil 305 of Oil and mud cut gassy water 2155 of Gassy water 4% Gas 96% Water 26500 of Salinity (PPM) 45 of Gravity (API) | |
View Pressures | No Recovery Gas data. |
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |