|
API: 15-051-25019
Operator: HESS OIL CO Field: Gasaway Lease: TEET-BILL Well 1-2 |
Location: T11S R19W, Sec. 2, S2 S2 SE NW
2560 South, 1850 East, from NW corner Longitude: -99.3996201 Latitude: 39.1256483 County: Ellis Status: OIL |
Spud Date: 20-JAN-00
Completion Date: 22-FEB-00 Plugging Date: Total Depth: 3700 Form. at depth: ARBUCKLE Elevation: 2090 KB |
| Test Number: 1 | Data Source: TRILOBITE |
|
Interval: 3030 to 3057
Formation tested: Topeka | Date, Time: 24-JAN-00; 19:40:35 |
|
Initial Hydro Pressure: 1406 PSI
First Initial Flow Pressure: 43 PSI First Final Flow Pressure: 83 PSI Initial Shut-in Pressure: 806 PSI Second Initial Flow Pressure: 86 PSI Second Final Flow Pressure: 94 PSI Final Shut-in Pressure: PSI Final Hydro Pressure: 1396 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 237 ft. Drill Pipe Length: 2798 ft. |
|
Initial Flow: Tool slid 7' when opening and then slid 2' more during initial flow. Bled off blow & had surface blow building to 1/2"". Final Flow: Very weak surface blow (tool slid another 6"".) Final Shut-In: None taken. |
|
|
Bottom Hole Temperature: 90 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 150 of Total Fluid 150 of Fluid in Drill Collars 120 of Slightly oil cut mud 30 of Slightly oil cut mud | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 2 | Data Source: TRILOBITE |
|
Interval: 3297 to 3362
Formation tested: Kansas City | Date, Time: 26-JAN-00; 01:55:50 |
|
Initial Hydro Pressure: 1586 PSI
First Initial Flow Pressure: 94 PSI First Final Flow Pressure: 445 PSI Initial Shut-in Pressure: 830 PSI Second Initial Flow Pressure: 458 PSI Second Final Flow Pressure: 607 PSI Final Shut-in Pressure: 825 PSI Final Hydro Pressure: 1540 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 235 ft. Drill Pipe Length: 3054 ft. |
|
Intial Flow: Strong blow- bottom of bucket in 90 seconds. Initial Shut-In: Blow built to bottom of bucket in 7 minutes. Final Flow: Strong blow bottom of bucket in 3 minutes. Final Shut-In: Blow built to bottom of bucket in 8 minutes. |
|
|
Bottom Hole Temperature: 104 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 1575 of Total Fluid 235 of Fluid in Drill Collars 1340 of Fluid in Drill Pipe 1095 of Gas in pipe 1575 of Gassy oil 36 of Gravity (API) | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 3 | Data Source: TRILOBITE |
|
Interval: 3364 to 3410
Formation tested: Kansas City 'G' | Date, Time: 26-JAN-00; 18:12:40 |
|
Initial Hydro Pressure: 1640 PSI
First Initial Flow Pressure: 18 PSI First Final Flow Pressure: 25 PSI Initial Shut-in Pressure: 796 PSI Second Initial Flow Pressure: 27 PSI Second Final Flow Pressure: 31 PSI Final Shut-in Pressure: 763 PSI Final Hydro Pressure: 1560 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 235 ft. Drill Pipe Length: 3116 ft. |
|
Initial Flow: Weak 1/2"" blow built to 1 1/4"". Initial Shut-In: No blow. Final Flow: Weak surface blow. |
|
|
Bottom Hole Temperature: DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 20 of Total Fluid 20 of Fluid in Drill Collars 20 of Oil specked slightly water cut mud | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 4 | Data Source: TRILOBITE |
|
Interval: 3408 to 3440
Formation tested: Kansas City 'H' | Date, Time: 27-JAN-00; 06:10:46 |
|
Initial Hydro Pressure: PSI
First Initial Flow Pressure: PSI First Final Flow Pressure: PSI Initial Shut-in Pressure: PSI Second Initial Flow Pressure: PSI Second Final Flow Pressure: PSI Final Shut-in Pressure: PSI Final Hydro Pressure: PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 235 ft. Drill Pipe Length: 3176 ft. |
| Initial Flow: Packer failure. Tried twice. | |
|
Bottom Hole Temperature: DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 250 of Total Fluid 235 of Fluid in Drill Collars 15 of Fluid in Drill Pipe 250 of Mud | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 6 | Data Source: TRILOBITE |
|
Interval: 3444 to 3500
Formation tested: Kansas City 'J-L' | Date, Time: 28-JAN-00; 03:32:32 |
|
Initial Hydro Pressure: 1676 PSI
First Initial Flow Pressure: 20 PSI First Final Flow Pressure: 87 PSI Initial Shut-in Pressure: 1138 PSI Second Initial Flow Pressure: 97 PSI Second Final Flow Pressure: 129 PSI Final Shut-in Pressure: 1129 PSI Final Hydro Pressure: 1657 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 235 ft. Drill Pipe Length: 3207 ft. |
|
Initial Flow: 3/4"" blow building to 9"". Initial Shut-In: Weak surface blow. Final Flow: 1/2"" blow building to 7"". Final Shut-In: Surface blow throughout. |
|
|
Bottom Hole Temperature: 102 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 265 of Total Fluid 235 of Fluid in Drill Collars 30 of Fluid in Drill Pipe 30 of Gas in pipe 30 of Clean oil 60 of Muddy oil 60 of Gassy oil & water cut mud 115 of Slightly oil & water cut mud 22000 of Salinity (PPM) 24 of Gravity (API) | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 7 | Data Source: TRILOBITE |
|
Interval: 3494 to 3606
Formation tested: Simpson/Arbuckle' | Date, Time: 29-JAN-00; 22:21:44 |
|
Initial Hydro Pressure: 1721 PSI
First Initial Flow Pressure: 24 PSI First Final Flow Pressure: 78 PSI Initial Shut-in Pressure: 1248 PSI Second Initial Flow Pressure: 85 PSI Second Final Flow Pressure: 119 PSI Final Shut-in Pressure: 1019 PSI Final Hydro Pressure: 1675 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 235 ft. Drill Pipe Length: 3269 ft. |
|
Initial Flow Weak 1"" blow surging & building to 5"". Final Flow: Surface blow building to 4"". |
|
|
Bottom Hole Temperature: 98 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 250 of Total Fluid 235 of Fluid in Drill Collars 15 of Fluid in Drill Pipe 135 of Clean gassy oil 115 of Slightly oil cut mud 28 of Gravity (API) | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
| Test Number: 8 | Data Source: TRILOBITE |
|
Interval: 3604 to 3616
Formation tested: Arbuckle | Date, Time: 29-JAN-00; 13:39:44 |
|
Initial Hydro Pressure: 1784 PSI
First Initial Flow Pressure: 752 PSI First Final Flow Pressure: 1019 PSI Initial Shut-in Pressure: 1154 PSI Second Initial Flow Pressure: 1081 PSI Second Final Flow Pressure: 1150 PSI Final Shut-in Pressure: 1157 PSI Final Hydro Pressure: 1737 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 235 ft. Drill Pipe Length: 3362 ft. |
|
Initial Flow: Strong blow building to bottom of bucket in 40 seconds. Initial Shut-In: Weak surface blow. Final Flow: Strong blow building to bottom of bucket in 90 seconds. Final Shut-In: No blow. |
|
|
Bottom Hole Temperature: 112 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
|
Recovery 2540 of Total Fluid 235 of Fluid in Drill Collars 2305 of Fluid in Drill Pipe 2540 of Salt water 30000 of Salinity (PPM) | |
| View Pressures | No Recovery Gas data. |
|
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |