API: 15-033-21085
Operator: DAYSTAR PETROLEUM INC. Field: Collier Flats Lease: Christopher 'A' Well 1 |
Location: T33S R19W, Sec. 32, N2 NE SW
2240 North, 3254 West, from SE corner Longitude: -99.4085445 Latitude: 37.1261821 County: Comanche Status: GAS |
Spud Date: 24-APR-00
Completion Date: 08-JUL-00 Plugging Date: Total Depth: 6156 Form. at depth: VIOLA Elevation: 1894 KB |
Test Number: 1 | Data Source: TRILOBITE |
Interval: 4825 to 4870
Formation tested: Swope | Date, Time: 02-MAY-00; 08:55:26 |
Initial Hydro Pressure: 2396 PSI
First Initial Flow Pressure: 21 PSI First Final Flow Pressure: 21 PSI Initial Shut-in Pressure: 56 PSI Second Initial Flow Pressure: 22 PSI Second Final Flow Pressure: 25 PSI Final Shut-in Pressure: 39 PSI Final Hydro Pressure: 2382 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 291.47 ft. Drill Pipe Length: ft. |
Initial Flow: Weak blow built to 1/2"" slowly died off in 18 minutes. Initial Shut-In: Dead blow. Final Flow: Dead blow.Flush tool.No blow Final Shut-In: No blow back. |
|
Bottom Hole Temperature: 112 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
Recovery 15 of Total Fluid 15 of Fluid in Drill Collars 15 of Drilling mud | |
View Pressures | No Recovery Gas data. |
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
Test Number: 2 | Data Source: TRILOBITE |
Interval: 5044 to 5075
Formation tested: Altamont | Date, Time: 03-MAY-00; 16:16:07 |
Initial Hydro Pressure: 2543 PSI
First Initial Flow Pressure: 26 PSI First Final Flow Pressure: 34 PSI Initial Shut-in Pressure: 359 PSI Second Initial Flow Pressure: 39 PSI Second Final Flow Pressure: 55 PSI Final Shut-in Pressure: 1171 PSI Final Hydro Pressure: 2450 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.35 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 291.47 ft. Drill Pipe Length: ft. |
Initial Flow: Weak blow built to 5 1/2"" in H2O bucket. Initial Shut-In: Bled down for 1 minute. No blow back. Final Flow: Weak blow built to bottom of bucket in 51 minutes. Final Shut-In: Bled down for 5 minutes. No blow back |
|
Bottom Hole Temperature: 121 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
Recovery 70 of Total Fluid 70 of Fluid in Drill Collars 540 of Gas in pipe. 70 of Slightly gas cut mud | |
View Pressures | No Recovery Gas data. |
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
Test Number: 3 | Data Source: TRILOBITE |
Interval: 5081 to 5107
Formation tested: Pawnee | Date, Time: 04-MAY-00; 09:28:21 |
Initial Hydro Pressure: 2518 PSI
First Initial Flow Pressure: 60 PSI First Final Flow Pressure: 75 PSI Initial Shut-in Pressure: 1616 PSI Second Initial Flow Pressure: 56 PSI Second Final Flow Pressure: 103 PSI Final Shut-in Pressure: 1575 PSI Final Hydro Pressure: 2528 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 291.47 ft. Drill Pipe Length: ft. |
Initial Flow: Fair blow bottom of bucket in 2 minutes. Initial Shut-In: Bled down for 5 minutes. No blow back Final Flow: Strong blow bottom of bucket in 10 seconds. Gas to surface in 2 minutes. Gauge gas. Final Shut-In: Bled down for 10 minutes. Built back to very weak surface blow. |
|
Bottom Hole Temperature: 121 DEG F
Percent Porosity: Samples: Gas Recovery: Comments: | |
Recovery 232 of Total Fluid 232 of Fluid in Drill Collars 4851 of Gas in pipe. 60 of Slightly gas & water cut mud 120 of Slightly gas & water cut mud 52 of Slightly gas & mud cut water 60000 of Salinity (PPM) | |
View Pressures | View Recovery Gas |
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
Test Number: 4 | Data Source: TRILOBITE |
Interval: 5126 to 5155
Formation tested: Fort Scott. | Date, Time: 05-MAY-00; 07:27:55 |
Initial Hydro Pressure: 2556 PSI
First Initial Flow Pressure: 89 PSI First Final Flow Pressure: 84 PSI Initial Shut-in Pressure: 1931 PSI Second Initial Flow Pressure: 40 PSI Second Final Flow Pressure: 84 PSI Final Shut-in Pressure: 1930 PSI Final Hydro Pressure: 2504 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 291.47 ft. Drill Pipe Length: ft. |
Initial Flow: Strong blow bottom of bucket in 30 seconds. Gas to surface in 7 minutes. Gauge gas. Initial Shut-In: Bled down for 15 minutes. No blow back. Final Flow: Strong blow bottom of bucket in 10 seconds. Gauge gas. Final Shut-In: Bled down for 20 minutes. No blow back. |
|
Bottom Hole Temperature: 112 DEG F
Percent Porosity: Samples: Caraway Analythical 728 N.Roosevelt Gas Recovery: Comments: | |
Recovery 120 of Total Fluid 120 of Fluid in Drill Collars 4997 of Gas in pipe. 120 of Slightly gas cut mud | |
View Pressures | View Recovery Gas |
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
Test Number: 5 | Data Source: TRILOBITE |
Interval: 5196 to 5290
Formation tested: Mississippi | Date, Time: 06-MAY-00; 08:56:30 |
Initial Hydro Pressure: 2671 PSI
First Initial Flow Pressure: 66 PSI First Final Flow Pressure: 80 PSI Initial Shut-in Pressure: 1418 PSI Second Initial Flow Pressure: 67 PSI Second Final Flow Pressure: 104 PSI Final Shut-in Pressure: 1748 PSI Final Hydro Pressure: 2584 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 291.47 ft. Drill Pipe Length: ft. |
Initial Flow: Fair blow bottom of bucket in 90 seconds. Gas to surface in 22 minutes Gauge gas. Initial Shut-In: Bled down for 8 minutes. No blow back. Final Flow: Strong blow Bottom of bucket in 10 seconds. Gauge gas. Final Shut-In: Bled down for 11 minutes. No blow back. |
|
Bottom Hole Temperature: 129 DEG F
Percent Porosity: Samples: Caraway Analytical Gas Recovery: Comments: | |
Recovery 120 of Total Fluid 120 of Fluid in Drill Collars 5080 of Gas in pipe. 210 of Slightly gas cut mud | |
View Pressures | View Recovery Gas |
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |
Test Number: 6 | Data Source: TRILOBITE |
Interval: 6058 to 6126
Formation tested: Viola | Date, Time: 09-MAY-00; 19:14:03 |
Initial Hydro Pressure: 3145 PSI
First Initial Flow Pressure: 477 PSI First Final Flow Pressure: 491 PSI Initial Shut-in Pressure: 2247 PSI Second Initial Flow Pressure: 406 PSI Second Final Flow Pressure: 515 PSI Final Shut-in Pressure: 2252 PSI Final Hydro Pressure: 3060 PSI |
Tool Data Hole Size: 7.88 in. Drill Collar ID: 2.25 in. Drill Pipe ID: 3.8 in. Drill Collar Length: 291.47 ft. Drill Pipe Length: ft. |
Initial Flow: Strong blow bottom of bucket in 15 seconds. Gas to surface in 5 minutes. Gauge gas. Initial Shut-In: Bled down for 30 minutes. Built back to bottom of bucket in 10 minutes. Final Flow: Strong blow bottom of bucket in 10 seconds. Gauge gas. Fluid to surface @ 25 minutes. Final Shut-In: Bled down for 60 minutes. Built back to bottom of bucket in 15 minutes. |
|
Bottom Hole Temperature: 144 DEG F
Percent Porosity: Samples: Caraway analytical 728 N.Roosevelt Gas Recovery: Comments: | |
Recovery 747 of Total Fluid 291 of Fluid in Drill Collars 456 of Fluid in Drill Pipe 5301 of Gas in pipe. 120 of Slightly gas & water cut mud 500 of Heavily gas & water cut mud 127 of Slightly mud cut gassy water 120000 of Salinity (PPM) | |
View Pressures | View Recovery Gas |
Download original data
ZIP file contains the orignal DST data supplied to the KGS by Trilobite Testing LLC . Four files are in each archive. The .flg file is an ascii file that has time and pressure at change points (open, shutin, etc.). The .csv is the original data extracted into a comma delimited file. The last two files (the .inf file and a file with a variable extension) are binary files that require Alpine DST software for display. | |