![]() |
![]() |
Specific Well--15-065-22764-0001
Engineering Data |
![]() |
View General Well Data | Viewing Engineering Data |
API: 15-065-22764-0001
KID: 1046522215 Lease: MORPHEW Well: 3 Original operator: Vincent Oil Corporation Current operator: Vincent Oil Corporation Field: Harmony Location: T7S R22W, Sec. 33 SW SW NW 2310 South, 330 East, from NW corner NAD27 Longitude: -99.7877902 NAD27 Latitude: 39.4019321 NAD83 Longitude: -99.78819 NAD83 Latitude: 39.40194 Lat-long from GPS |
County: Graham
Permit Date: Spud Date: Sep-19-2017 Completion Date: Oct-12-2017 Plugging Date: Well Type: EOR Status: Authorized Injection Well Total Depth: 3850 Elevation: 2213 KB Producing Formation: IP Oil (bbl): IP Water (bbl): IP GAS (MCF): KDOR code for Oil: 123021 KCC Permit No.: |
View well on interactive map
View well in the Walter’s Digital Library (WDL login required) |
Drill Stem Tests Taken: No Samples Set to Survey: No Cores Taken: No Electric Logs Run: No Method of Completion: Date of First or Resumed Production/Injection: |
Producing Method: Estimated production per 24 hours Oil: Water: Gas: Disposition of Gas: Tubing record Size: 2.3750 Set at: 3574 Packer at: Production intervals: |
Casing recordnew or used? New |
|||||||
Purpose of String | Size Hole Drilled |
Size Casing Set (in O.D.) |
Weight Lbs/Ft |
Setting Depth |
Type of Cement |
# Sacks Used |
Type and Percent Additives |
---|---|---|---|---|---|---|---|
Surface | 12.25 | 8.625 | 20 | 297 | 60 / 40 POZ | 200 | 2% Gel & 4% CC |
Production | 7.875 | 4.5 | 10.5 | 3824 | ASC | 200 | 10% Salt |
Additional Cementing/Squeeze Recordpurpose? Protect Casing |
|||||||
Depth Top Bottom |
Type of Cement | # Sacks Used | Type and Percent Additives | ||||
---|---|---|---|---|---|---|---|
0 to 360 | 60/40 POZ | 100 | 4% Gel | ||||
365 to 1858 | 60/40 POZ | 500 | 6% Ge & 1/4# Flo-seal/sx |
Perforation Record |
|||||||
Shots Per Foot | Perforation Top |
Perforation Bottom |
Bridge Plug Type |
Bridge Plug Set At |
Material Record | ||
---|---|---|---|---|---|---|---|
4 | 3602 | 3606 | Existing perforations | ||||
4 | 3612 | 3616 | Existing perforations | ||||
Following completion of remedial cementing from 360 to surface the casing was pressure tested to 600 Psig. | |||||||
2.3750" lined tubing was run on a lined AD-1 packer and set at a depth of 3574'. Following a State witnessed | |||||||
Mechanical Integrity pressure test to 340# the well was shut in awaiting issuance of a final EOR injection permit. |
Please note: The link below takes you away from the web site of the Kansas Geological Survey to the website of the Kansas Geological Society, a library in Wichita. The Survey can not help with information presented by the Walters Digital Library.
From Kansas Geological Society's Walters Digital Library