~VERSION INFORMATION
 VERS    .                                    2.0: CWLS LOG ASCII STANDARD - VERSION 2.0
 WRAP    .                                     NO: ONE LINE PER DEPTH STEP
~WELL INFORMATION BLOCK
#MNEM.UNIT       DATA TYPE   INFORMATION
#---------    -------------  ------------------------
 STRT    .F                                  -0.8: START DEPTH
 STOP    .F                                 141.0: STOP DEPTH
 STEP    .F                                   .10: STEP DEPTH
 NULL    .                                      0: NULL VALUE
 COMP    .        KANSAS GEOLOGICAL SURVEY/ GMD#5: COMPANY
 WELL    .                                   21-1: WELL
 FLD     .                                    N/A: FIELD
 LOC     .                              1-26S-11W: LOCATION
 LOC1    .                               SE SE SE: LOCATION LINE 1
 COUN    .                                  PRATT: COUNTY
 STAT    .                                 KANSAS: STATE
 CTRY    .                       
             USA: COUNTRY
 SRVC    .                                       : SERVICE COMPANY
 DATE    .                          27-APRIL-1995: LOG DATE
~CURVE INFORMATION BLOCK
#MNEM.UNIT      API CODE     Curve Description
#---------    -------------  ------------------------
 DEPT    .F                                      : 1  DEPTH
 GAM(NAT).CPS                                    : 2  GAM(NAT)
 COND    .MMHO/M                                 : 3  COND
 RES     .OHM-M                                  : 4  RES
 TEMP    .DEG                                   F: 5  TEMP
 AP-COND .MMHO/M                                 : 6  AP-COND
 TEMP    .CPS                                    : 7  TEMP
 AP-COND .CPS                                    : 8  AP-COND
 TENSION .POUNDS                                 : 9  TENSION
 TIME    .MINUTES                                : 0  TIME
~Parameter Information Block
#MNEM.UNIT        Value      Description
#---------    -------------  -------------------
-----
 BHT     .DEGC                                   : Bottom Hole Temperature
 BS      .MM                                     : Bit Size
 FD      .K/M3                                   : Fluid Density
 MDEN    .K/M3                                   : Logging Matrix Velocity
 MATR    .                                      2: Neutron Matrix(0=LIME,1=SAND,2=DOLO)
 FNUM    .                                       : Tortuosity  Constant Archie's (a)
 FEXP    .                                       : Cementation Exponent Archie's (m)
 DFD     .K/M3                                   : Mud Weight
 DFV     .S                                      : Mud Viscosity
 DFL     .C3                                     : Mud Fluid Loss
 DFPH    .                                       : Mud pH
 RMFS    .OHMM                                   : Mud Filtrate Resistivity
 EKB     .F                                      : Elevation Kelly Bushing
 EGL     .F                                      : Elevatio
n Ground Level
~Other Information
 COM1.          COMMENT #1:
 COM2.          COMMENT #2:
 COM3.          COMMENT #3:
 COM4.          COMMENT #4:
 OSRV.      OTHER SERVICES:
 LOGU.        LOGGING UNIT:
 RECB.         RECORDED BY:
 LAT .            LATITUDE:
 LON .           LONGITUDE:
 ECUT.ELECTRIC LOG CUT-OFF:
 LMF .   LOG MEASURED FROM:
 DMF .DRILLERMEASURED FROM:
 PD  .     PERMANENT DATUM:
 PDEV.ELEV PERMANENT DATUM:
 DFEV.    ELEV DRILL FLOOR:
 DRDP.     DRILLER'S DEPTH:
 CASD.     CASING DIAMETER:
 CASB.       CASING BOTTOM:
 CASX.         CASING TYPE:
 CAST.    CASING THICKNESS:
 TNOC.  TIME CIRCU STOPPED:
 MST .   MEAN SURFACE TEMP:
 TGRD.TEMPERATURE GRADIENT:
 MAGD.MAGNETIC DECLINATION:  7.5
 MDEN.      DENSITY MATRIX:
 DTMT.      DELTA-T MATRIX:
 DTFL.   DELTA-T FLUID VEL:
 MSRC.   MUD SAMPLE SOURCE:
 MRS .     MUD RESISTIVITY:
 MTP .            MUD TEMP:
 MFTP.   MUD FILTRATE TEMP:
 MCRS.MUD CAKE RESISTIVITY:
 MCTP.       MUD CAKE TEMP:
 FTYP.          FLUID TYPE:
 FV  .   
  FLUID VISCOSITY:
 FPH .            FLUID pH:
 LTYP.            LOG TYPE:  ORIGINAL
 TNAM.           TOOL NAME:  9511C
 TSN .  TOOL SERIAL NUMBER:     758
 DCAL.   DEPTH CALIBRATION:  0.500100
#MNEM.UNIT       DATA Type   Information
#---------    -------------  ------------------------