~VERSION INFORMATION SECTION
VERS. 2.0: CWLS log ASCII Standard -VERSION 2.0
WRAP. NO: Single line per depth step
~WELL INFORMATION SECTION
#MNEM.UNIT Data Type Information
#--------- ------------- -----------------------------
STRT.FEET 401.000 :
STOP.FEET 4760.000 :
STEP.FEET 0.5000 :
NULL. -999.2500 :
COMP. PICKRELL DRILLING COMPANY, INC. : COMPANY
WELL. THORPE TRUST "B" #1 : WELL
FLD . DAYLIGHT : FIELD
LOC . 1980' FSL & 1980' FEL : LOCATION
STAT. KANSAS : STATE
SRVC. Tucker Wireline Services : SERVICE COMPANY
DATE. Jun 15 2011 : LOG DATE
API . 15-097-21694-00-00 : API NUMBER
~CURVE INFORMATION SECTION
#MNEM .UNIT API CO
DE Curve Description
#--------.------- ------------- -----------------------
DEPT .FEET 00 001 00 00: Measured Depth
CILD .mMHO 07 110 45 00: Deep Induction R Conductivity
CALN .in 45 280 24 00: Compensated Neutron Caliper (Diameter)
CALD .in 45 280 13 00: Litho Caliper (Diameter)
GR .gAPI 07 310 01 00: Gamma Ray - API Units
ILD .ohm/m 07 120 45 00: Phased Deep Induction Resistivity
ILM .ohm/m 07 120 44 00: Phased Medium Induction Resistivity
LWTLB .lb 00 000 00 00: Line Weight Filtered (lbs)
NPLS .% 42 330 01 00: Compensated Neutron Porosity (NAPI, Limestone Matrix)
DPLS .% 45 890 10 00: Lithology Density Porosity (Matrix Density 2.71 g/cc)
SFL .ohm/m 07 220 04 00: Spherically Focused Resistivity, Environmentally Corrected
SP .mV 07 010 01 00: Spontaneous Potential (Proc
essed, Internally Calibrated)
DRHO .g/cc 45 356 01 00: Lithology Density (LDP-DA) Correction
RHOB .g/cc 45 350 02 00: Lithology Density (LDP-DA)
PE .b/E 45 358 00 00: Litho (LDP-DA) Corrected Long Spaced Photo Absorption Factor
~PARAMETER INFORMATION SECTION
#MNEM.UNIT Value Description
#--------- ---------------------------------------- -----------------------------------
RUN . 1 : Run number
GL .Ft 2134.000000 : Ground level elevation
DREF. KB : Depth reference
EREF.Ft 2144.000000 : Elevation of depth reference
TDL .Ft 4766.0 : Total depth, logger
TDD .Ft 4770.0 : Total depth, driller
CSGL.Ft 455.0 : Casing bottom, logger
CSGD.Ft
455.0 : Casing bottom, driller
CSGS.In 8.625 : Casing size
CSGW.Lbs 36.00 : Casing weight
BS .In 7.88 : Bit size
MUD . WBM : Mud type
MUDD.LBS/GAL 9.000 : Mud density
MUDV.SEC 43.000 : Mud viscosity
FL .CC 13.600 : Fluid loss rate
PH . 10.000 : Mud pH
MUDS. MEASURED : Mud source
RM .OHMM 0.100 : Resistivity of mud
RMT .F 80.0 : Temperature of mud
RMF .OHMM 0.085 : Resistivity of mud filtrate
RMFT.F 80.0 : Temperature of mud filtrate
RMC .OHMM 0.115 : Resistivity of m
ud cake
RMCT.F 80.0 : Temperature of mud cake
TMAX.F 123.0 : Maximum recorded temperature
TIMC.DAY/HR : Date/Time circulation stopped
TIMD.DAY/HR Jun 15 2011 21:45 : Date/Time logger tagged bottom
UNIT. TRK123 : Logging unit_number
BASE. TULSA : Home base of logging unit
ENG . R. FRANKLIN : Recording Engineer
WIT . T. MCLOED : Witnessed by
~OTHER
#Run number 1
ALL PRESENTATIONS AS PER CUSTOMER REQUEST.
GRT, CNT, LDT, AND PIT RUN IN COMBINATION.
CALIPERS ORIENTED ON X-Y AXIS.
2.71 G/CC USED TO CALCULATED POROSITY.
ANNULAR HOLE VOLUME CALCULATED UISING 5.50'' PRODUCTION CASING.
PULLED MAX PULL ON TD.
CLOSED CALIPERS PICKED UP OFF TD AT MAX PULL.
LOGGED OUT JUST ABOVE TD.
NO REPEAT PRESENTED DUE TO
HOLE CONDITIONS.
SPIKES ON ILM AND ILD DUE TO WASHOUTS BELOW 4170'.
DETAIL PRESENTED FROM TD TO 3300'.
GRT: GRP.
CNT: PHIN, CLCNIN.
LDT: PORL, LCORN, PECLN, LDENN, PORLLS, CLLDIN.
PIT: ILD, ILM, SPU, SFLAEC.
OPERATORS:
M. GARNER
S. DAVIS
#DEPT CILD CALN CALD GR ILD ILM LWTLB NPLS DPLS SFL SP DRHO RHOB PE
|