~VERSION INFORMATION SECTION
VERS. 2.0: CWLS log ASCII Standard -VERSION 2.0
WRAP. NO: Single line per depth step
~WELL INFORMATION SECTION
#MNEM.UNIT Data Type Information
#--------- ------------- -----------------------------
STRT.FEET 0.00 :
STOP.FEET 867.00 :
STEP.FEET 0.50 :
NULL. -999.2500 :
COMP. COLT ENERGY INC. : COMPANY
WELL. MITCHELL FAMILY TRUST (828) #M12-i: WELL
FLD . : FIELD
LOC . 100 FSL & 1512 FEL : LOCATION
SECT. 25: SECTION
TOWN. 21 S: TOWNSHIP
RANG. 21 E: RANGE
STAT. KANSAS : STATE
SRVC. Tucker Wireline Services : SERVICE COMPANY
DATE. 2012-10-12 : LOG DATE
API .
15-107-24636 : API NUMBER
~CURVE INFORMATION SECTION
#MNEM .UNIT API CODE Curve Description
#--------.------- ------------- -----------------------
DEPT .FEET 00 001 00 00: Measured Depth
CILD .mMHO 07 110 45 00: Deep Induction R Conductivity
CALN .in 45 280 24 00: Compensated Neutron Caliper (Diameter)
CALD .in 45 280 13 00: Litho Caliper (Diameter)
GR .gAPI 07 310 01 00: Gamma Ray - API Units
ILD .ohm/m 07 120 45 00: Phased Deep Induction Resistivity
ILM .ohm/m 07 120 44 00: Phased Medium Induction Resistivity
LWTLB .lb 00 000 00 00: Line Weight Filtered (lbs)
NPLS .% 42 330 01 00: Compensated Neutron Porosity (NAPI, Limestone Matrix)
DPLS .% 45 890 10 00: Lithology Density Porosity (Matrix Density 2.71 g/cc)
SFL .ohm/m 07 220 04 00: Spherically Focused Resistivity, Envi
ronmentally Corrected
SP .mV 07 010 01 00: Spontaneous Potential (Processed, Internally Calibrated)
DRHO .g/cc 45 356 01 00: Lithology Density (LDP-DA) Correction
RHOB .g/cc 45 350 02 00: Lithology Density (LDP-DA)
PE .b/E 45 358 00 00: Litho (LDP-DA) Corrected Long Spaced Photo Absorption Factor
~PARAMETER INFORMATION SECTION
#MNEM.UNIT Value Description
#--------- ---------------------------------------- -----------------------------------
RUN . 1 : Run number
GL .Ft 994.000000 : Ground level elevation
DREF. GL : Depth reference
EREF.Ft 994.000000 : Elevation of depth reference
TDL .Ft 861.0 : Total depth, logger
TDD .Ft 861.0 : Total depth, driller
CSGL.Ft
22.0 : Casing bottom, logger
CSGD.Ft 22.0 : Casing bottom, driller
CSGS.In 8.625 : Casing size
CSGW.Lbs 30.00 : Casing weight
BS .In 6.75 : Bit size
MUD . WBA : Mud type
MUDD.LBS/GAL 0.000 : Mud density
MUDV.SEC 0.000 : Mud viscosity
FL .CC 0.000 : Fluid loss rate
PH . 0.000 : Mud pH
MUDS. MEASURED : Mud source
RM .OHMM 4.000 : Resistivity of mud
RMT .F 70.0 : Temperature of mud
RMF .OHMM 3.400 : Resistivity of mud filtrate
RMFT.F 70.0 : Temperature of mud filtrate
RMC .O
HMM 4.600 : Resistivity of mud cake
RMCT.F 70.0 : Temperature of mud cake
TMAX.F 85.0 : Maximum recorded temperature
TIMC.DAY/HR : Date/Time circulation stopped
TIMD.DAY/HR 2012-10-12 18:00 : Date/Time logger tagged bottom
UNIT. TRK 119 : Logging unit_number
BASE. TULSA : Home base of logging unit
ENG . Z. HICKMAN, R. FRANKLIN : Recording Engineer
WIT . R. ASHLOCK : Witnessed by
~OTHER
#Run number 1
ALL PRESENTATIONS AS PER CUSTOMER REQUEST.
GRT, CNT, LDT, AND PIT RUN IN COMBINATION.
CALIPERS ORIENTED ON X-Y AXIS.
2.71 G/CC USED TO CALCULATED POROSITY.
ANNULAR HOLE VOLUME CALCULATED UISING 4.50'' PRODUCTION CASING.
PHIN IS CALIPER CORRECTED
GRT: GRP.
CNT: PHIN, CLCNIN.
L
DT: PORL, LCORN, PECLN, LDENN, PORLLS, CLLDIN.
PIT: ILD, ILM, SPU, SFLAEC, CIRD.
OPERATORS:
J. THOMAS
M. RUBY
#DEPT CILD CALN CALD GR ILD ILM LWTLB NPLS DPLS SFL SP DRHO RHOB PE
|