~VERSION INFORMATION SECTION
VERS. 2.0: CWLS log ASCII Standard -VERSION 2.0
WRAP. NO: Single line per depth step
~WELL INFORMATION SECTION
#MNEM.UNIT Data Type Information
#--------- ------------- -----------------------------
STRT.FEET 272.60 :
STOP.FEET 3733.60 :
STEP.FEET 0.50 :
NULL. -999.2500 :
COMP. LACHENMAYR OIL LLC. : COMPANY
WELL. BARTEL #3 : WELL
FLD . HOLLOW NICKEL : FIELD
LOC . 330' FSL & 430' FEL : LOCATION
SECT. 19: SECTION
TOWN. 22 S: TOWNSHIP
RANG. 03 W: RANGE
STAT. KANSAS : STATE
SRVC. Tucker Wireline Services : SERVICE COMPANY
DATE. 2013-02-09 : LOG DATE
API . 1
5-079-20699 : API NUMBER
~CURVE INFORMATION SECTION
#MNEM .UNIT API CODE Curve Description
#--------.------- ------------- -----------------------
DEPT .FEET 00 001 00 00: Measured Depth
CILD .mMHO 07 110 45 00: Deep Induction R Conductivity
CALN .in 45 280 24 00: Compensated Neutron Caliper (Diameter)
CALD .in 45 280 13 00: Litho Caliper (Diameter)
GR .gAPI 07 310 01 00: Gamma Ray - API Units
ILD .ohm/m 07 120 45 00: Phased Deep Induction Resistivity
ILM .ohm/m 07 120 44 00: Phased Medium Induction Resistivity
LWTLB .lb 00 000 00 00: Line Weight Filtered (lbs)
PHIA .% 00 000 00 00: Apparent Porosity
NPLS .% 42 330 01 00: Compensated Neutron Porosity (NAPI, Limestone Matrix)
DPLS .% 45 890 10 00: Lithology Density Porosity (Matrix Density 2.71 g/cc)
SFL .ohm/m
07 220 04 00: Spherically Focused Resistivity, Environmentally Corrected
SP .mV 07 010 01 00: Spontaneous Potential (Processed, Internally Calibrated)
DRHO .g/cc 45 356 01 00: Lithology Density (LDP-DA) Correction
RHOB .g/cc 45 350 02 00: Lithology Density (LDP-DA)
PE .b/E 45 358 00 00: Litho (LDP-DA) Corrected Long Spaced Photo Absorption Factor
~PARAMETER INFORMATION SECTION
#MNEM.UNIT Value Description
#--------- ---------------------------------------- -----------------------------------
RUN . 1 : Run number
GL .Ft 1444.000000 : Ground level elevation
DREF. KB : Depth reference
EREF.Ft 1453.000000 : Elevation of depth reference
TDL .Ft 3725.0 : Total depth, logger
TDD .Ft
3728.0 : Total depth, driller
CSGL.Ft 315.0 : Casing bottom, logger
CSGD.Ft 315.0 : Casing bottom, driller
CSGS.In 13.375 : Casing size
CSGW.Lbs 24.00 : Casing weight
BS .In 7.88 : Bit size
MUD . WBM : Mud type
MUDD.LBS/GAL 8.900 : Mud density
MUDV.SEC 58.000 : Mud viscosity
FL .CC 8.000 : Fluid loss rate
PH . 10.500 : Mud pH
MUDS. MEASURED : Mud source
RM .OHMM 1.400 : Resistivity of mud
RMT .F 60.0 : Temperature of mud
RMF .OHMM 1.200 : Resistivity of mud filtrate
RMFT.F
60.0 : Temperature of mud filtrate
RMC .OHMM 1.600 : Resistivity of mud cake
RMCT.F 60.0 : Temperature of mud cake
TMAX.F 107.0 : Maximum recorded temperature
TIMC.DAY/HR : Date/Time circulation stopped
TIMD.DAY/HR 2013-02-09 22:30 : Date/Time logger tagged bottom
UNIT. TRK 123 : Logging unit_number
BASE. TULSA : Home base of logging unit
ENG . S. DAVIS : Recording Engineer
WIT . S. DEENIHAN : Witnessed by
~OTHER
#Run number 1
ALL PRESENTATIONS AS PER CUSTOMER REQUEST.
GRT, CNT, LDT, AND PIT RUN IN COMBINATION.
CALIPERS ORIENTED ON X-Y AXIS.
2.71 G/CC USED TO CALCULATED POROSITY.
ANNULAR HOLE VOLUME CALCULATED USING 5.50'' PRODUCTION CASING.
DETAIL TO 2400'
GRT: GRP.
CNT: PHIN, CLCNIN.
LDT: PORL, LCORN, PECLN, LDENN, PORLLS, CLLDIN.
PIT: ILD, ILM, SPU, SFLAEC.
OPERATORS:
B. COLWILL
J. KLINE
#DEPT CILD CALN CALD GR ILD ILM LWTLB PHIA NPLS DPLS SFL SP DRHO RHOB PE
|