~VERSION INFORMATION SECTION
VERS. 2.0: CWLS log ASCII Standard -VERSION 2.0
WRAP. NO: Single line per depth step
~WELL INFORMATION SECTION
#MNEM.UNIT Data Type Information
#--------- ------------- -----------------------------
STRT.FEET 94.00 :
STOP.FEET 2087.50 :
STEP.FEET 0.50 :
NULL. -999.2500 :
COMP. STELBAR OIL CORPORATION, INC : COMPANY
WELL. FLOYD A #34 : WELL
FLD . LANDON-FLOYD : FIELD
LOC . 2310' FSL & 2005' FWL : LOCATION
SECT. 24: SECTION
TOWN. 32 S: TOWNSHIP
RANG. 10 E: RANGE
STAT. KANSAS : STATE
SRVC. Tucker Wireline Services : SERVICE COMPANY
DATE. 2012-12-13 : LOG DATE
API . 1
5-019-27251 : API NUMBER
~CURVE INFORMATION SECTION
#MNEM .UNIT API CODE Curve Description
#--------.------- ------------- -----------------------
DEPT .FEET 00 001 00 00: Measured Depth
CILD .mMHO 07 110 45 00: Deep Induction R Conductivity
CALN .in 45 280 24 00: Compensated Neutron Caliper (Diameter)
CALD .in 45 280 13 00: Litho Caliper (Diameter)
GR .gAPI 07 310 01 00: Gamma Ray - API Units
ILD .ohm/m 07 120 45 00: Phased Deep Induction Resistivity
ILM .ohm/m 07 120 44 00: Phased Medium Induction Resistivity
LWTLB .lb 00 000 00 00: Line Weight Filtered (lbs)
PHIN .% 00 000 00 00: Compensated Neutron Porosity (NAPI)
PORL .% 00 000 00 00: Lithology Density Porosity
SFL .ohm/m 07 220 04 00: Spherically Focused Resistivity, Environmentally Corrected
SP .mV 0
7 010 01 00: Spontaneous Potential (Processed, Internally Calibrated)
DRHO .g/cc 45 356 01 00: Lithology Density (LDP-DA) Correction
RHOB .g/cc 45 350 02 00: Lithology Density (LDP-DA)
PE .b/E 45 358 00 00: Litho (LDP-DA) Corrected Long Spaced Photo Absorption Factor
~PARAMETER INFORMATION SECTION
#MNEM.UNIT Value Description
#--------- ---------------------------------------- -----------------------------------
RUN . 1 : Run number
GL .Ft 1129.000000 : Ground level elevation
DREF. KB : Depth reference
EREF.Ft 1136.000000 : Elevation of depth reference
TDL .Ft 2080.0 : Total depth, logger
TDD .Ft 2075.0 : Total depth, driller
CSGL.Ft 135.0 : Casing bot
tom, logger
CSGD.Ft 127.0 : Casing bottom, driller
CSGS.In 8.625 : Casing size
CSGW.Lbs 24.00 : Casing weight
BS .In 7.88 : Bit size
MUD . WBM : Mud type
MUDD.LBS/GAL 9.100 : Mud density
MUDV.SEC 52.000 : Mud viscosity
FL .CC 11.200 : Fluid loss rate
PH . 8.500 : Mud pH
MUDS. MEASURED : Mud source
RM .OHMM 3.500 : Resistivity of mud
RMT .F 60.0 : Temperature of mud
RMF .OHMM 3.000 : Resistivity of mud filtrate
RMFT.F 60.0 : Temperature of mud filtrate
RMC .OHMM 4.000 : Re
sistivity of mud cake
RMCT.F 60.0 : Temperature of mud cake
TMAX.F 92.0 : Maximum recorded temperature
TIMC.DAY/HR : Date/Time circulation stopped
TIMD.DAY/HR : Date/Time logger tagged bottom
UNIT. TRK 123 : Logging unit_number
BASE. TULSA : Home base of logging unit
ENG . Z. HICKMAN, R. FRANKLIN : Recording Engineer
WIT . J. BAKER : Witnessed by
~OTHER
#Run number 1
ALL PRESENTATIONS AS PER CUSTOMER REQUEST.
GRT, CNT, LDT, AND PIT RUN IN COMBINATION.
CALIPERS ORIENTED ON X-Y AXIS.
2.71 G/CC USED TO CALCULATED POROSITY.
ANNULAR HOLE VOLUME CALCULATED USING 5.50'' PRODUCTION CASING.
PHIN IS CALIPER CORRECTED
HIGH RESOLUTION LOG PRESENTED FROM TOTAL DEPTH TO SURFACE CASING
GRT: GRP, GRX.
CNT: PHIN, PHIA, CLCNIN, PHXN.
LDT: PORL, PXRL, LCORN, LCORNX, PECLN, PECLNX, LDENN, LDENNX, PORLLS, CLLDIN.
PIT: ILD, ILM, SPU, SFLAEC, CIRD.
OPERATORS:
M. RUBY
D. HOPPER
#DEPT CILD CALN CALD GR ILD ILM LWTLB PHIN PORL SFL SP DRHO RHOB PE
|