LAS Header
|
|
|
Specific Well--15-191-22696
LAS Header |
|
|
~VERSION
VERS. 2.00 :CWLS Log ASCII Standard - VERSION 2.0
WRAP. NO :One Line per depth step
PROD. Schlumberger :LAS Producer
PROG. DLIS to ASCII 2.3 :LAS Program name and version
CREA. 2013/09/11 15:29 :LAS Creation date {YYYY/MM/DD hh :mm}
DLIS_CREA. 2013-Sep-08 00:00 :DLIS Creation date and time {YYYY-MMM-DD hh :mm}
SOURCE. CFVN_00039_SOURCE_ENERGY_STRUTHER_14_41_PEX_GPIT_MAIN_REV.DLIS :DLIS File Name
FILE-ID. MaxWell_4Dlis :File Identification Number
#--------------------------------------------------
~WELL
#MNEM.UNIT DATA DESCRIPTION
#---- ------ -------------- -----------------------------
STRT.F 3951.00000 :START DEPTH
STOP.F -7.50000 :STOP DEPTH
STEP.F -0.50000
:STEP
NULL. -999.25000 :NULL VALUE
COMP. Source Energy MidCon LLC :COMPANY
WELL. Struthers 14-41 :WELL
FLD. Wildcat :FIELD
LOC. SHL: 412' FNL & 836' FEL :LOCATION
CNTY. Sumner :COUNTY
STAT. Kansas :STATE
CTRY. United States :COUNTRY
API. 15-191-22696 :API NUMBER
UWI. 15191226960000 :UNIQUE WELL ID
DATE. 07-Sep-2013 :LOG DATE {DD-MMM-YYYY}
SRVC. Schlumberger :SERVICE COMPANY
LATI.DEG 37.187420 degrees :LATITUDE
LONG.DEG -
97.278183 degrees :LONGITUDE
GDAT. :GeoDetic Datum
SECT. 14 :Section
RANG. 1E :Range
TOWN. 33S :Township
#-----------------------------------------------------------------------------
~PARAMETER
#MNEM.UNIT VALUE :DESCRIPTION
#----.---- --------------- :-------------------
RUNS. 2 :Number of runs available
RUN1. 1 :Run Identification mnemonic for Run #1
RUN2. 2 :Run Identification mnemonic for Run #2
TD.F 3947.99976 :TOTAL MEASURED DEPTH | RUN1
BHS. OPEN
:BOREHOLE STATUS (OPEN OR CASED HOLE) | RUN1
MATR. LIME :ROCK MATRIX FOR NEUTRON POROSITY CORRECTIONS | RUN1
GCSE. HCAL :GENERALIZED CALIPER SELECTION | RUN1
BHT.DEGF 131.95000 :BOTTOM HOLE TEMPERATURE | RUN1
DTF.US/F 189.00000 :DELTA-T FLUID | RUN1
DTM.US/F 56.00000 :DELTA-T MATRIX | RUN1
MDEN.G/C3 2.71000 :MATRIX DENSITY FOR DENSITY POROSITY | RUN1
FD.G/C3 1.00000 :FLUID DENSITY | RUN1
BHFL. WATER :BOREHOLE FLUID TYPE | RUN1
MINC.DEG 65.35059 :MAGNETIC FIELD INCLINATION | RUN1
MFIN.OER 0.51769 :MAGNETIC FIELD INTENSITY | RUN1
MDEC.DEG 4.0127
4 :MAGNETIC FIELD DECLINATION | RUN1
STEM.DEGF 68.00000 :SURFACE TEMPERATURE | RUN1
BSAL.PPM 5193.10400 :BOREHOLE SALINITY | RUN1
MRT2.DEGF -999.25000 :MAXIMUM RECORDED TEMPERATURE 2 | RUN1
MRT1.DEGF 131.95000 :MAXIMUM RECORDED TEMPERATURE 1 | RUN1
RMFB.OHMM 0.47119 :RESISTIVITY OF MUD FILTRATE AT BOTTOM HOLE TEMPERATURE | RUN1
RMB.OHMM 0.62825 :RESISTIVITY OF MUD AT BOTTOM HOLE TEMPERATURE | RUN1
MCST.DEGF 89.00000 :MUDCAKE SAMPLE TEMPERATURE | RUN1
RMCS.OHMM 1.36500 :RESISTIVITY OF MUD CAKE SAMPLE | RUN1
MFST.DEGF 89.00000 :MUD FILTRATE SAMPLE TEMPERATURE | RUN1
RMFS.OHMM 0.68250
:RESISTIVITY OF MUD FILTRATE SAMPLE | RUN1
MST.DEGF 89.00000 :MUD SAMPLE TEMPERATURE | RUN1
RMS.OHMM 0.91000 :RESISTIVITY OF MUD SAMPLE | RUN1
DFPH. 10.40000 :DRILLING FLUID PH | RUN1
DFL.C3 6.90000 :DRILLING FLUID LOSS | RUN1
DFV.S 50.00000 :DRILLING FLUID VISCOSITY | RUN1
DFD.LB/G 9.30000 :DRILLING FLUID DENSITY | RUN1
CWEI.LB/F 36.00000 :CASING WEIGHT | RUN1
CSIZ.IN 9.62500 :CURRENT CASING SIZE | RUN1
BS.IN 8.75000 :BIT SIZE | RUN1
BLI.F 3947.99976 :BOTTOM LOG INTERVAL | RUN1
TLI.F 305.00000 :TO
P LOG INTERVAL | RUN1
TDL.F 3947.99976 :LOGGER TOTAL DEPTH | RUN1
TDD.F 3960.00024 :DRILLER TOTAL DEPTH | RUN1
APD.F 14.00000 :ELEVATION OF DEPTH REFERENCE (LMF) ABOVE PERMANENT DATUM | RUN1
EPD.F 1161.00000 :ELEVATION OF PERMANENT DATUM (PDAT) ABOVE MEAN SEA LEVEL | RUN1
EDF.F 1174.00000 :ELEVATION OF DERRICK FLOOR | RUN1
EGL.F 1161.00000 :ELEVATION OF GROUND LEVEL | RUN1
EKB.F 1175.00000 :ELEVATION OF KELLY BUSHING | RUN1
LUN. 3082 :LOGGING UNIT NUMBER | RUN1
SON. :SERVICE ORDER NUMBER | RUN1
HIDE. WILDCAT :HEADER IDENTIFIER | RUN1
R9. BO
W SPRING USED TO ECCENTRALIZE THE HGNS. :REMARKS LINE 9 | RUN1
R8. TOOL RAN AS PER TOOL SKETCH :REMARKS LINE 8 | RUN1
R7. :REMARKS LINE 7 | RUN1
R6. :REMARKS LINE 6 | RUN1
R5. :REMARKS LINE 5 | RUN1
R4. :REMARKS LINE 4 | RUN1
R3. :REMARKS LINE 3 | RUN1
R2. :REMARKS LINE 2 | RUN1
R1. :REMARKS LINE 1 | RUN1
OS5. :OTHER SERVICES LINE 5 | RUN1
OS4. :OTHER SERVICES LINE 4 | RUN1
OS3. :OTHER SERVICES LINE 3 | RUN1
OS2.
:OTHER SERVICES LINE 2 | RUN1
OS1. :OTHER SERVICES LINE 1 | RUN1
MCSS. CALCULATED :MUDCAKE SAMPLE SOURCE | RUN1
MFSS. CALCULATED :MUD FILTRATE SAMPLE SOURCE | RUN1
TCS. 08 15 00 :TIME CIRCULATION STOPPED | RUN1
DCS. 07-SEP-2013 :DATE CIRCULATION STOPPED | RUN1
DFT. WATER BASED MUD :DRILLING FLUID TYPE | RUN1
ENGI. DAN GOODYEAR :ENGINEER S NAME | RUN1
LUL. ELK CITY OK :LOGGING UNIT LOCATION | RUN1
TLAB. 13 30 00 :TIME LOGGER AT BOTTOM | RUN1
DLAB. 07-SEP-2013 :DATE LOGGER AT BOTTOM | RUN1
RUN. 1
:RUN NUMBER | RUN1
DATE. 07-SEP-2013 :TOOLS ABOVE ROTARY TABLE DATE | RUN1
RANG. 1E :RANGE | RUN1
TOWN. 33S :TOWNSHIP | RUN1
SECT. 14 :SECTION | RUN1
LONG. -97.278183 DEGREES :LONGITUDE | RUN1
LATI. 37.187420 DEGREES :LATITUDE | RUN1
APIN. 15-191-22696 :API WELL NUMBER | RUN1
DMF. KB :DRILLING MEASURED FROM (NAME OF DRILLING ELEVATION REFERENCE) | RUN1
LMF. KB :LOGGING MEASURED FROM (NAME OF LOGGING ELEVATION REFERENCE) | RUN1
PDAT. GL :PERMANENT DATUM | RUN1
FL2. LONGITUDE 97.278183° W
:FIELD LOCATION, LINE 2 | RUN1
FL1. LATITUDE 37.18742° N :FIELD LOCATION, LINE 1 | RUN1
FL. SHL 412' FNL & 836' FEL :FIELD LOCATION | RUN1
STAT. KANSAS :STATE OR PROVINCE | RUN1
COUN. SUMNER :COUNTY OR PARISH | RUN1
FN. WILDCAT :FIELD NAME | RUN1
WN. STRUTHERS 14-41 :WELL NAME | RUN1
CN1. :COMPANY NAME, LINE 1 | RUN1
CN. SOURCE ENERGY MIDCON LLC :COMPANY NAME | RUN1
RUN. 1 :RUN NUMBER | RUN2
PDAT. GL :PERMANENT DATUM | RUN2
EPD.C3 1161.000000 :ELEVATION OF PERMANENT DATUM ABOVE MEAN SEA LEVEL | RUN2
LMF. KB
:LOGGING MEASURED FROM (NAME OF LOGGING ELEVATION REFERENCE) | RUN2
APD.F 14.000000 :ELEVATION OF DEPTH REFERENCE (LMF) ABOVE PERMANENT DATUM | RUN2
~CURVE
#MNEM.UNIT VALUE :DESCRIPTION
#----.---- --------------- :-------------------
DEPT.F 00 001 00 00 :Depth Index
CS.F/HR :CABLE SPEED {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-CS,-7.5 to 3951.0 )
TENS.LBF :CABLE TENSION {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-TENS,-7.5 to 3951.0 )
PXND_HILT.CFCF :HILT POROSITY CROSSPLOT {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-PXND_HILT,-7.5 to 3951.0 )
ECGR.GAPI :GAMMA-RAY {F13.4} (Input; STRUTH
ERS_14_41_PEX_GPIT_MAIN.las-ECGR,-7.5 to 3951.0 )
GR.GAPI :GAMMA-RAY {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-GR,-7.5 to 3951.0 )
NPHI.CFCF :THERMAL NEUTRON POROSITY (RATIO METHOD) {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-NPHI,-7.5 to 3951.0 )
TNPH.CFCF :THERMAL NEUTRON POROSITY {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-TNPH,-7.5 to 3951.0 )
NPOR.CFCF :ENHANCED THERMAL NEUTRON POROSITY {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-NPOR,-7.5 to 3951.0 )
GDEV.DEG :HGNS DEVIATION {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-GDEV,-7.5 to 3951.0 )
P1AZ.DEG :PAD 1 AZIMUTH {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-P1AZ,-7.5 to 3951.0 )
SDEVM.DEG
:SONDE DEVIATION {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-SDEVM,-7.5 to 3951.0 )
HAZIM.DEG :HOLE AZIMUTH {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-HAZIM,-7.5 to 3951.0 )
HDAR.IN :HOLE DIAMETER FROM AREA {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-HDAR,-7.5 to 3951.0 )
CDF.LBF :CALIBRATED DOWNHOLE FORCE {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-CDF,-7.5 to 3951.0 )
ATCO90.MM/M :ARRAY INDUCTION TWO FOOT CONDUCTIVITY A90 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-ATCO90,-7.5 to 3951.0 )
AFCO60.MM/M :ARRAY INDUCTION FOUR FOOT CONDUCTIVITY A60 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AFCO60,-7.5 to 3951.0 )
AO10.OHMM :A
RRAY INDUCTION ONE FOOT RESISTIVITY A10 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AO10,-7.5 to 3951.0 )
AO20.OHMM :ARRAY INDUCTION ONE FOOT RESISTIVITY A20 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AO20,-7.5 to 3951.0 )
AO30.OHMM :ARRAY INDUCTION ONE FOOT RESISTIVITY A30 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AO30,-7.5 to 3951.0 )
AO60.OHMM :ARRAY INDUCTION ONE FOOT RESISTIVITY A60 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AO60,-7.5 to 3951.0 )
AO90.OHMM :ARRAY INDUCTION ONE FOOT RESISTIVITY A90 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AO90,-7.5 to 3951.0 )
AT10.OHMM :ARRAY INDUCTION TWO FOOT RESISTIVITY A10 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AT10,-7.5 to 3951.0 )
AT20.OHMM
:ARRAY INDUCTION TWO FOOT RESISTIVITY A20 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AT20,-7.5 to 3951.0 )
AT30.OHMM :ARRAY INDUCTION TWO FOOT RESISTIVITY A30 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AT30,-7.5 to 3951.0 )
AT60.OHMM :ARRAY INDUCTION TWO FOOT RESISTIVITY A60 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AT60,-7.5 to 3951.0 )
AT90.OHMM :ARRAY INDUCTION TWO FOOT RESISTIVITY A90 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AT90,-7.5 to 3951.0 )
AF10.OHMM :ARRAY INDUCTION FOUR FOOT RESISTIVITY A10 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AF10,-7.5 to 3951.0 )
AF20.OHMM :ARRAY INDUCTION FOUR FOOT RESISTIVITY A20 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AF20,
-7.5 to 3951.0 )
AF30.OHMM :ARRAY INDUCTION FOUR FOOT RESISTIVITY A30 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AF30,-7.5 to 3951.0 )
AF60.OHMM :ARRAY INDUCTION FOUR FOOT RESISTIVITY A60 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AF60,-7.5 to 3951.0 )
AF90.OHMM :ARRAY INDUCTION FOUR FOOT RESISTIVITY A90 {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-AF90,-7.5 to 3951.0 )
ATRT.OHMM :ARRAY INDUCTION TWO FOOT RT {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-ATRT,-7.5 to 3951.0 )
ASCA.MV :ARRAY INDUCTION SPA CALIBRATED {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-ASCA,-7.5 to 3951.0 )
AMF.OHMM :ARRAY INDUCTION MUD RESISTIVITY FULLY CALIBRATED {F13.4} (Input; STRUTHERS_14_
41_PEX_GPIT_MAIN.las-AMF,-7.5 to 3951.0 )
HCAL.IN :HRCC CAL. CALIPER {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-HCAL,-7.5 to 3951.0 )
DSOZ.IN :HRDD STANDARD RESOLUTION DENSITY STANDOFF {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-DSOZ,-7.5 to 3951.0 )
HDRA.G/C3 :HRDD DENSITY CORRECTION {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-HDRA,-7.5 to 3951.0 )
PEFZ. :HRDD STANDARD RESOLUTION FORMATION PHOTOELECTRIC FACTOR {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-PEFZ,-7.5 to 3951.0 )
RHOZ.G/C3 :HRDD STANDARD RESOLUTION FORMATION DENSITY {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-RHOZ,-7.5 to 3951.0 )
DPHZ.CFCF :HRDD STANDARD RESOLUTION DENSITY POROSITY {F13.4} (Inpu
t; STRUTHERS_14_41_PEX_GPIT_MAIN.las-DPHZ,-7.5 to 3951.0 )
HMIN.OHMM :MCFL MICRO INVERSE RESISTIVITY {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-HMIN,-7.5 to 3951.0 )
HMNO.OHMM :MCFL MICRO NORMAL RESISTIVITY {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-HMNO,-7.5 to 3951.0 )
RXOZ.OHMM :MCFL STANDARD RESOLUTION INVADED ZONE RESISTIVITY {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-RXOZ,-7.5 to 3951.0 )
RSOZ.IN :MCFL STANDARD RESOLUTION RESISTIVITY STANDOFF {F13.4} (Input; STRUTHERS_14_41_PEX_GPIT_MAIN.las-RSOZ,-7.5 to 3951.0 )
SP.MV :SP, ARMOR RETURN COMPENSATED {F13.4} (Input; STRUTHER_14_41_SPAR.las-SPAR,-7.5 to 3951.0 )
|