~Version Information
VERS.                      2.0: CWLS Log ASCII Standard - VERSION 2.0
WRAP.                       NO: One line per depth step
#Non standard LAS - data should be wrapped
~Well Information Block
STRT.FT              4720.0000: START DEPTH
STOP.FT              8477.0000: STOP DEPTH
STEP.FT                 0.5000: STEP
NULL.                -999.2500: NULL VALUE
COMP.          SAMUEL GARY & ASSOCIATES: COMPANY
WELL.              12-22-9-#H2: WELL
FLD.                   WILDCAT: FIELD
LOC.           SHL: 200' FSL & 1350' FWL: LOCATION
SECT.                       09: SECTION
TOWN.                     12 S: TOWNSHIP
RANG.                     22 W: RANGE
CNTY.                    TREGO: COUNTY
SRVC.              THRUBIT LLC: SERVICE COMPANY
DATE.          Tue Jul 09 19-16-16 2013: LOG DATE
UWI.            15195228680100: UNIQUE WELL ID
STAT.                   KANSAS: STATE
CS.FT                    7421': CASING LOGGER
DFT.                       WBM: TYPE FLUID IN HOLE
DFD/VI
S.               8.5/ 28: DENSITY/VISCOSITY
RMFS.OHMM_DEGF 9.73 OHMS @ 83 DEGF: RMF@MEASURED TEMP
TCS.           02:45 09JUL2013: TIME CIRCULATION STOPPED
BHT.DEGF              123 DEGF: MAXIMUM RECORDED TEMPERATURE
~Curve Information Block
DEPT.FT            0 000 00 00: Depth
TBHV.FT3                      : Borehole Volume
ABHV.FT3                      : Annular Volume
MudR.OHM-M                    : Mud Resistivity
A5DBHC.MMHO/M                 : A5DBHC
10IN_1FT_R.OHM-M                : Array Induction 1 Foot Resistivity 10" DOI
20IN_1FT_R.OHM-M                : Array Induction 1 Foot Resistivity 20" DOI
30IN_1FT_R.OHM-M                : Array Induction 1 Foot Resistivity 30" DOI
60IN_1FT_R.OHM-M                : Array Induction 1 Foot Resistivity 60" DOI
90IN_1FT_R.OHM-M                : Array Induction 1 Foot Resistivity 90" DOI
10IN_2FT_R.OHM-M                : Array Induction 2 Foot Resistivity 10" DOI
20IN_2FT_R.OHM-M                : Array Induction 2 Foot Resistivity 20" DOI

30IN_2FT_R.OHM-M                : Array Induction 2 Foot Resistivity 30" DOI
60IN_2FT_R.OHM-M                : Array Induction 2 Foot Resistivity 60" DOI
90IN_2FT_R.OHM-M                : Array Induction 2 Foot Resistivity 90" DOI
DCAL.IN                       : Density Caliper
DFCAL.IN                      : Differential Caliper
DRHO.G/CC                     : Density Correction
RHOB.G/CC                     : Bulk Density
DPHI.PU                       : Density Porosity
PEF.BARN                      : Photo-electric Factor
DPHIR.PU                      : Density Porosity from RHOB
DPHIL.PU                      : Density Porosity from RHOLS
DBHC.G/CC                     : Density Borehole Correction
CNLS.PU                       : CN Limestone Porosity
CNPOR.PU                      : CN Selected Porosity
GR.GAPI                       : Gamma Ray
GRTEMP.DEGF                   : Converts C to F reading
~Parameter Information Block
BHCOR.                  1.0000: Bore-Hole Correction
BHF
L_TYPE.              1.0000: Bore-Hole Fluid Type
BHFLRES.OHM-M           1.0000: Borehole Fluid Resistivity
BHFLRESSRC.             1.0000: Borehole Fluid Resistivity Source
BHIDSRC.                1.0000: Source of Bore Hole ID
BOREID.IN               6.1250: Borehole I.D.
BOTTEMP.DEGF          123.0000: Bottom Hole Temperature
CASED?.                 0.0000: Cased hole ?
CASEOD.IN               4.5000: Casing O.D.
CASETHCK.IN             0.0000: Casing Thickness
CEMWATERSA.KPPM          0.0000: Cement Water Salinity
CMNTTHCK.IN             0.0000: Cement Thickness
DNBHC?.                 0.0000: Do Density (RHOB) Bore-hole Correction
DPORSEL.                1.0000: Density Porosity Source
FLUIDDEN.G/CC           1.0000: Fluid Density
FRMSALIN.KPPM           0.0000: Formation Salinity
LATNOR.                 0.0000: Lateral Normalization
MATRXDEN.G/CC           2.7100: Matrix Density
MUDSALIN.KPPM           1.3000: Mud Salinity
MudWgt.LB/GAL           8.5000: Mud Weight
NPORSEL.     
           1.0000: Neutron Porosity Curve Select
PEBHC?.                 1.0000: Do PE Bore-hole Correction
PERFS.                  0.0000: Perforation Flag
RESTMPSRC.              1.0000: Source of Resistivity Tool Temperature
SO.IN                   0.5000: Stand Off
SRFTEMP.DEGF           90.0000: Surface Temperature
SZCOR.                  1.0000: CN Size Cor. ?
TDEPTH.FT            8500.0000: Total Depth
TMPCOR.                 1.0000: CN Temp. Cor. ?
TOOLPOS.                3.0000: Tool Position