LAS Header
|
|
|
Specific Well--15-069-20502
LAS Header |
|
|
~Version Information
VERS. 2.0: CWLS log ASCII Standard -VERSION 2.0
WRAP. NO: One line per depth step
~Well Information Block
#MNEM.UNIT VALUE/NAME DESCRIPTION
#--------- ----------- ---------------------------
STRT.F 495.0000: START DEPTH
STOP.F 4991.0000: STOP DEPTH
STEP.F 0.2500: STEP DEPTH
NULL. -999.25: NULL VALUE
~Parameter Information Block
#MNEM.UNIT Value Description
#--------- ----------- ---------------------------
BARI. OFF: BARITE CORR
BS .in 7.8750: Bit Size
CBD .ft 1874.0000: Casing Depth
CDS .ft 0.0000: CasingStartDep
CS .in 8.6250: Casing OD
CSWT.lbpf 24.0000: Casing Weight
DCS . 16-Nov-17: DateCircEndT
DFD .ppg 9.2000: Mud Density
DFL .cptm 8.8000: Fluid Loss
DFV .cP
16.0000: Mud Viscosity
ENGI. MICHAEL RICHTER: Engineer Name
DFT . Water Based Mud: Mud Type
IQVR. WL INSITE R5.0.5 (Build 8): WLIQ Version
LTYP. RAW: LogDataType
LUL . EL RENO, OK: LoggingUnitLoc
LUN . 12147634: LoggingUnitNum
PH .pH 9.5000: Mud pH
MFSS. N/A: Rmf Source
MSS . N/A: Mud Sample Source
DFV .s/qt 51.0000: Mud Viscosity
RMCS. N/A: Mud Cake Resistivity
RUN . 3: Run Number
SCT1. 16-Nov-17: StartDateRun1
SVCN. GTET-DSNT-SDLT: Service Name
SVCS. CH_HOS, GTET, DSNT, SDLT: Services
TCS . 12 00: Time Ciculation Ended
TDCE.ucts 12.00.52 16-Nov-17: Time Circ End
TDD .ft 4985.0000: Depth Driller
TDL .ft 4989.0000: Depth Logger
TMAX.degF 130.0000: Max Rec Temp
WI
TN. DAVE GOLDAK: Witness Name
~Curve Information Block
#MNEM.UNIT API CODE Curve Description
#--------- ----------- ---------------------------
DEPT.F 00 000 000 000: Depth
GR .api 00 000 000 000: Gamma API
TENS.lbs 00 000 000 000: Tension
DHTN.lbs 00 000 000 000: CH Tension
NPHI.% 00 000 000 000: Neutron Porosity
#Other Information
#
#WARRANTY: Halliburton will use its best efforts to furnish customers with
#accurate information and interpretations that are part of, and incident to, the services
#provided. However, Halliburton cannot and does not warrant the accuracy
#or correctness of such information and interpretations. Under no circumstances should any
#such information or interpretation be relied upon as the sole basis for any drilling,
#completion, production, or financial decision or any procedure involving any risk to the
#safety of an
y drilling venture, drilling rig or its crew or any other third party. The
#Customer has full responsibility for all drilling, completion and production operation.
#Halliburton makes no representations or warranties, either expressed or
#implied, including, but not limited to, the implied warranties of merchantability or fitness
#for a particular purpose, with respect to the services rendered. In no event will
#Halliburton be liable for failure to obtain any particular results or for
#any damages, including, but not limited to, indirect, special or consequential damages,
#resulting from the use of any information or interpretation provided by Halliburton.
#
#****************
#STELBAR_ROWAN_A\0002 GTET\005 16-Nov-17 16:34 Up @4991.3f
#
#
# SERVICE
# GTET
#-----------------------------------------------------------------------------------------------
#Tool Tool Name Ser
ial Weight Length Length
#Mnemonic Number (lbs) (ft) Accumulation(ft)
#-----------------------------------------------------------------------------------------------
#CH_HOS CH_HOS 00000025 37.50 2.50 8.85
#GTET GTET 11013114 165.00 8.52 0.33
#BLNS Bull Nose 12345678 5.00 0.33 0.00
#-----------------------------------------------------------------------------------------------
#Total 207.50 11.35
#
#
# PARAMETERS
#--------------------------------------------------------------------------------------------------------------------------
#Tool Name Mnemonic Description
Value Units
#--------------------------------------------------------------------------------------------------------------------------
#
# TOP --------------------------------------------
#
#SHARED BS Bit Size 7.875 in
#SHARED UBS Use Bit Size instead of Caliper for all applications. No
#SHARED MDBS Mud Base Water
#SHARED MDWT Borehole Fluid Weight 9.200 ppg
#SHARED WAGT Weighting Agent Natural
#SHARED BSAL Borehole salinity 0.00 ppm
#SHARED
FSAL Formation Salinity NaCl 0.00 ppm
#SHARED WPHS OBM Water Phase Salinity NaCl 0.00 ppm
#SHARED OFOW Base Oil Fraction from Oil/Water Ratio 1.00
#SHARED OBMT Oil based Mud Type Diesel
#SHARED KPCT Percent K in Mud by Weight? 0.00 %
#SHARED RMUD Mud Resistivity 1.000 ohmm
#SHARED TRM Temperature of Mud 75.0 degF
#SHARED CSD Logging Interval is Cased? No
#SHARED ICO
D AHV Casing OD 5.500 in
#SHARED CSOD Inner Casing OD size 8.500 in
#SHARED CSWT Casing Weight 17.00 lbpf
#SHARED ISOC Is Outer Casing Present? No
#SHARED COOD Outer Casing OD size 0.000 in
#SHARED CSWT Outer Casing Weight 0.00 lbpf
#SHARED CSCM Casing Cemented Yes
#SHARED CMTY API Cement Class H
#SHARED CMWT
Cement Weight 16.500 ppg
#SHARED CSTR Compressive Strength 1000.00 psia
#SHARED ST Surface Temperature 75.0 degF
#SHARED TD Total Well Depth 4985.00 ft
#SHARED BHT Bottom Hole Temperature 130.0 degF
#SHARED SVTM Navigation and Survey Master Tool NONE
#SHARED AZTM High Res Z Accelerometer Master Tool GTET
#SHARED TEMM CBM Temperature Master Tool GTET
#GTET GROK Proc
ess Gamma Ray? Yes
#GTET GRSO Gamma Tool Standoff 0.000 in
#GTET GEOK Process Gamma Ray EVR? No
#GTET TPOS Tool Position for Gamma Ray Tools. Centered
#GTET BHSM Borehole Size Source Tool Bit Size
#
# BOTTOM --------------------------------------------
#
#
# INPUTS, DELAYS AND FILTERS
#------------------------------------------------------------------------------------------------------------------------
#Mnemonic Input Description Delay Filter Length Filter Type
#
(ft) (ft)
#------------------------------------------------------------------------------------------------------------------------
#
# Depth Panel
#
#TENS Tension 0.000 NO
#
# CH_HOS
#
#DHTN DownholeTension 0.000 0.000 BLK
#
# GTET
#
#TPUL Tension Pull 2.791 NO
#GR Natural Gamma Ray API 2.791 1.750 TRI
#GRU Unfiltered Natural Gamma Ray API 2.791
NO
#EGR Natural Gamma Ray API with Enhanced Vertical Resolution 2.791 1.416 , 0.750 W
#HDIA Measured Hole Diameter 0.000 NO
#ACCZ Accelerometer Z 0.000 0.083 BLK
#DEVI Inclination 0.000 NO
#
#
# OUTPUTS
#------------------------------------------------------------------------------------------------------------
#Mnemonic Output Description Filter Length Filter Type
# (ft)
#----------------------------------------------------------------------------------------------
--------------
#
# Depth Panel
#
#TPUL Tension Pull NO
#TENS Tension NO
#TSW Tool String Weight NO
#LSPD Line Speed NO
#BITSIZE Bit Size NO
#MINM Minute Mark Flag NO
#MGMK Magnetic Mark Flag NO
#CASEOD Inner Casing OD size NO
#ICV Instrument Cable
Voltage NO
#ICA Instrument Cable Current NO
#ACV Auxiliary Set Voltage NO
#TNSR Tension Cal Raw Value NO
#WL1V Wire Line 1 Voltage NO
#WL2V Wire Line 2 Voltage NO
#WL3V Wire Line 3 Voltage NO
#WL4V Wire Line 4 Voltage NO
#WL5V Wire Line 5 Voltage NO
#WL6V Wire Line 6 Voltage
NO
#WL1C Wire Line 1 Current NO
#WL2C Wire Line 2 Current NO
#WL3C Wire Line 3 Current NO
#WL4C Wire Line 4 Current NO
#WL5C Wire Line 5 Current NO
#WL6C Wire Line 6 Current NO
#WLFC Wire Line Fault Current NO
#
# CH_HOS
#
#BTMP BoreHole Temperature 4.250 BLK
#DLOD Down Hole Load Cell Measurement NO
#DHLP Down Hole Load Cell Positive Measurement NO
#DHLN Down Hole Load Cell Negative Measurement NO
#DHTN DownholeTension NO
#
# GTET
#
#ACCZ Accelerometer Z NO
#DEVI Inclination NO
#BTMP BoreHole Temperature NO
#PLTC Plot Control Mask NO
#EGR Natural Gamma Ray API with Enhan
ced Vertical Resolution NO
#EGRC Natural Gamma Ray API with Enhanced Vertical Resolution and NO
# BHC
#PLTC Plot Control Mask NO
#BHAB Borehole Absorption NO
#BHCN Borehole Correction NO
#ICID Inner Casing ID NO
#KCTN Pottasium Correction NO
#PLTC Plot Control Mask NO
#GR Natural Gamma Ray API
NO
#GRCO Natural Gamma Ray API Borehole Corrected NO
#PLTC Plot Control Mask NO
#BHAB Borehole Absorption NO
#BHCN Borehole Correction NO
#ICID Inner Casing ID NO
#KCTN Pottasium Correction NO
#
#
#STELBAR_ROWAN_A\0003 GTET-DSNT-SDLT\002 16-Nov-17 18:25 Up @1775.3f
#
#
# SERVICE
# GTET-DSNT-SDLT
#-----------------------------------------------------------------------------------------------
#Tool
Tool Name Serial Weight Length Length
#Mnemonic Number (lbs) (ft) Accumulation(ft)
#-----------------------------------------------------------------------------------------------
#CH_HOS CH_HOS 11459024 37.50 2.50 30.30
#XOHD XOHD 11572809 20.00 0.95 29.35
#GTET GTET 11013114 165.00 8.52 20.83
#DSNT DSNT* 11055304 180.60 9.69 11.14
#SDLT SDLT*** 10960494 434.00 10.81 0.33
#BLNS Bull Nose 12345678 5.00 0.33 0.00
#-----------------------------------------------------------------------------------------------
#Total
842.10 32.80
#" * " = Overbody Attached
#
#
# PARAMETERS
#--------------------------------------------------------------------------------------------------------------------------
#Tool Name Mnemonic Description Value Units
#--------------------------------------------------------------------------------------------------------------------------
#
# TOP --------------------------------------------
#
#SHARED BS Bit Size 7.875 in
#SHARED UBS Use Bit Size instead of Caliper for all applications. No
#SHARED MDBS Mud Base Water
#SHARED MDWT Bor
ehole Fluid Weight 9.200 ppg
#SHARED WAGT Weighting Agent Natural
#SHARED BSAL Borehole salinity 0.00 ppm
#SHARED FSAL Formation Salinity NaCl 0.00 ppm
#SHARED WPHS OBM Water Phase Salinity NaCl 0.00 ppm
#SHARED OFOW Base Oil Fraction from Oil/Water Ratio 1.00
#SHARED OBMT Oil based Mud Type Diesel
#SHARED KPCT Percent K in Mud by Weight? 0.00 %
#SHARED RMUD Mud Resisti
vity 2.000 ohmm
#SHARED TRM Temperature of Mud 75.0 degF
#SHARED CSD Logging Interval is Cased? No
#SHARED ICOD AHV Casing OD 5.500 in
#SHARED CSOD Inner Casing OD size 8.500 in
#SHARED CSWT Casing Weight 17.00 lbpf
#SHARED ISOC Is Outer Casing Present? No
#SHARED COOD Outer Casing OD size 0.000 in
#SHARED CSWT Outer Casing Weight
0.00 lbpf
#SHARED CSCM Casing Cemented Yes
#SHARED CMTY API Cement Class H
#SHARED CMWT Cement Weight 16.500 ppg
#SHARED CSTR Compressive Strength 1000.00 psia
#SHARED ST Surface Temperature 75.0 degF
#SHARED TD Total Well Depth 4985.00 ft
#SHARED BHT Bottom Hole Temperature 130.0 degF
#SHARED SVTM Navigation and Survey Maste
r Tool NONE
#SHARED AZTM High Res Z Accelerometer Master Tool GTET
#SHARED TEMM CBM Temperature Master Tool GTET
#DSNT DNOK Process DSN? Yes
#DSNT DEOK Process DSN EVR? No
#DSNT NLIT Neutron Lithology Limestone
#DSNT DNSO DSN Standoff - 0.25 in (6.35 mm) Recommended 0.250 in
#DSNT DNTT Temperature Correction Type Gradient
#DSNT DNTT DSN Tool Temperature
75.0 degF
#DSNT DNFT DSN Fixed Temperature Value 200.0 degF
#DSNT DNTT Top Zone Temperature Value 75.0 degF
#DSNT DNBT DSN Bottom Zone Temperature Value 130.0 degF
#DSNT DTDT Top Depth for Temperature Gradient Calculation (Measured De 0 ft
# pth)
#DSNT DBDT Bottom Zone Temperature Depth (Measured Depth) 4985 ft
#DSNT DPRS DSN Pressure Correction Type Gradient
#DSNT DNFP DSN Fixed Pressure Value
14.70 psia
#DSNT DNTP DSN Top Zone Pressure Value 14.70 psia
#DSNT DNBP DSN Bottom Zone Pressure Value 2840.00 psia
#DSNT DTDP Top Depth for Pressure Gradient Calculation (Measured Depth 0 ft
# )
#DSNT DNDP Bottom Zone Pressure Depth (Measured Depth) 4985 ft
#DSNT SHCO View More Correction Options No
#DSNT HSCO Correct for Holesize? Yes
#DSNT MCCO Correct for Mud Cake?
No
#DSNT MWCO Correct for Mud Weight? No
#DSNT BSCO Correct for Borehole Salinity? No
#DSNT FSCO Correct for Formation Salinity? No
#DSNT SGCO Correct for Formation Sigma? No
#DSNT SIGM Sigma Matrix 0.00
#DSNT SIGW Sigma Water 0.00
#DSNT CTCO Correct for Casing Thickness? Yes
#DSNT CMCO Correct for Cement Thickness?
Yes
#DSNT UTVD Use TVD for Gradient Corrections? No
#DSNT LHWT Logging Horizontal Water Tank? No
#DSNT USND Use Var StandOff? Yes
#DSNT BHSM Borehole Size Source Tool SDLT
#
# BOTTOM --------------------------------------------
#
#
# INPUTS, DELAYS AND FILTERS
#------------------------------------------------------------------------------------------------------------------------
#Mnemonic Input Description Delay Filter Length Filter Type
# (ft)
(ft)
#------------------------------------------------------------------------------------------------------------------------
#
# DSNT
#
#TPUL Tension Pull 13.045 NO
#RNDS Near Detector Telemetry Counts 13.146 1.417 BLK
#RFDS Far Detector Telemetry Counts 13.896 0.583 TRI
#DNTT DSN Tool Temperature 13.146 NO
#DSNS DSN Tool Status 13.045 NO
#ERND Near Detector Telemetry Counts EVR 13.146 0.000 BLK
#ERFD Far Detector Telemetry Count
s EVR 13.896 0.000 BLK
#ENTM DSN Tool Temperature EVR 13.146 NO
#HDIA Measured Hole Diameter 0.000 NO
#
#
# OUTPUTS
#------------------------------------------------------------------------------------------------------------
#Mnemonic Output Description Filter Length Filter Type
# (ft)
#------------------------------------------------------------------------------------------------------------
#
# DSNT
#
#PLTC Plot Control Mask NO
#EDLI
Neutron Lithology EVR NO
#ENPH Neutron Porosity EVR NO
#ENPS Neutron Porosity Sandstone Matrix EVR NO
#ENLI Neutron Porosity Limestone Matrix EVR NO
#ENPD Neutron Porosity Dolomite Matrix EVR NO
#ENRA DSN Near to Far Ratio EVR NO
#ENDS Near Detector Telemetry Counts EVR NO
#EFDS Far Detector Telemetry Counts EVR NO
#PLTC Plot Control Mask NO
#NPHI
Neutron Porosity NO
#NDSN Near Detector Telemetry Counts NO
#FDSN Far Detector Telemetry Counts NO
#NRAT DSN Near to Far Ratio NO
#NLIT Neutron Lithology NO
#NLIM Neutron Porosity Limestone Matrix NO
#NPHS Neutron Porosity Sandstone Matrix NO
#NPHD Neutron Porosity Dolomite Matrix NO
#NPHU Neutron Limestone Porosity No Salinity NO
#PLTC Plot Co
ntrol Mask NO
#UNPL Uncorrected Neutron Porosity Lime NO
#UNPS Uncorrected Neutron Porosity Sand NO
#UNPD Uncorrected Neutron Porosity Dolo NO
#BSC Borehole Size Correction NO
#MCTC Mud Cake Thickness Correction NO
#BHSC Bore Hole Salinity Correction NO
#MWC Mud Weight Correction NO
#FTC Formation Temperature Correction NO
#FPC Formation Pressur
e Correction NO
#TSOC Tool Standoff Correction NO
#FSCL Formation Salinity Correction LS NO
#FSCS Formation Salinity Correction SS NO
#FSDO Formation Salinity Correction DO NO
#FSIL Formation Sigma & HI Correction LS NO
#FSIS Formation Sigma & HI Correction SS NO
#FSID Formation Sigma & HI Correction DO NO
#MUDW Computed Mud Weight NO
#CSGT Casing Thickness Correction
NO
#CMTC Cement Thickness Correction NO
#BSCN Neutron Porosity - Bore Hole Size Corrected NO
#BSCL Neutron Porosity - Bore Hole Size Corrected Lime NO
#BSCS Neutron Porosity - Bore Hole Size Corrected Sand NO
#BSCD Neutron Porosity - Bore Hole Size Corrected Dolomite NO
#TEMP Temperature NO
#PRES Presssure NO
#CALU Caliper Used NO
#SDOU StandOff Used
NO
|