|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: Gabbert and Jones | Status: Constructed | ||
| Location: T33S, R40W, Sec. 25, SW NE NE | County: Morton | ||
| Directions: from Rolla, 2 mi N, 1 mi E, 0.25 mi S, and west into site | |||
| Latitude: 37.153453 | Longitude: -101.6128717 | Datum NAD 27 | |
| Latitude: 37.153478 | Longitude: -101.6133105 | Datum NAD 83 | |
| Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
| View well on interactive map | |||
| General Info | ||
| Well Depth: 320 ft. | Elevation: ft. | |
| Static Water Level: 105 ft. | Est. Yield: 90 gpm. | |
| Comp. Date: 18-May-1990 | Well Use: Oil Field Water Supply | |
| DWR Applic. #: 9000202 | Other ID: Stout B 3 | |
| Links | |
| No Wizard information available. | |
| View info from WIMAS Water Right Data base... | |
| Driller Info | ||
| Driller: T & W Water Well Serv., Inc. | License #: 142 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
| Ground water encountered: 215 ft. , 0 ft. , 0 ft. | ||
| Pump test data: Well water was 120 ft after 2 hours pumping 80 gpm | ||
| Casing Info | ||
| Casing Type: PVC
Casing Joints: |
Diam: 5 in. to 220 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
| Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: | ||
| Screen and Perforation Info | ||
| Screen Type: PVC | Screen Openings: Saw cut | |
| Screen-perforated intervals | From: 220 ft to 320 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
| Gravel pack intervals | From: ft to ft | |
| Grout Info | ||
| Grout used: Neat cement, | From: 0 to 20 ft
From: 0 to 0 ft From: 0 to 0 ft | |
| Source of Possible Contamination | ||
| Source: Oil well/gas well | ||
| Direction from well: | Distance: 0 ft | |
| Lithologic Log
(Log data entered by KGS.) | ||
| From: 0 ft. to 105 ft. | overburden | |
| From: 105 ft. to 120 ft. | fine sand | |
| From: 120 ft. to 140 ft. | fine sand and clay | |
| From: 140 ft. to 160 ft. | fine sand and clay | |
| From: 160 ft. to 180 ft. | fine sand and clay | |
| From: 180 ft. to 200 ft. | fine sand and clay | |
| From: 200 ft. to 220 ft. | clay | |
| From: 220 ft. to 240 ft. | clay | |
| From: 240 ft. to 320 ft. | fine sand and clay | |