|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: Mobil Oil Corp./Cloyd Millemon | Status: Constructed | ||
| Location: T35S, R39W, Sec. 6, NE SW SE | County: Morton | ||
| Directions: from Rolla, 6.25 mi S and 1.75 mi E | |||
| Latitude: 37.0279187 | Longitude: -101.5969831 | Datum NAD 27 | |
| Latitude: 37.0279451 | Longitude: -101.5974215 | Datum NAD 83 | |
| Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
| View well on interactive map | |||
| General Info | ||
| Well Depth: 400 ft. | Elevation: ft. | |
| Static Water Level: 197 ft. | Est. Yield: 100 gpm. | |
| Comp. Date: 19-Dec-1988 | Well Use: Oil Field Water Supply | |
| DWR Applic. #: T88-617 | Other ID: Unit 19 | |
| Links | |
| No Wizard information available. | |
| View info from WIMAS Water Right Data base... | |
| Driller Info | ||
| Driller: Bernard E. Carlile Water Well Service, Inc. | License #: 118 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
| Ground water encountered: 197 ft. , 0 ft. , 0 ft. | ||
| Pump test data: Well water was 0 ft after 0 hours pumping 0 gpm | ||
| Casing Info | ||
| Casing Type: PVC
Casing Joints: |
Diam: 6 in. to 260 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
| Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: | ||
| Screen and Perforation Info | ||
| Screen Type: PVC | Screen Openings: Saw cut | |
| Screen-perforated intervals | From: 260 ft to 400 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
| Gravel pack intervals | From: ft to ft | |
| Grout Info | ||
| Grout used: Neat cement, Bentonite | From: 0 to 2 ft
From: 2 to 22 ft From: 170 to 180 ft | |
| Source of Possible Contamination | ||
| Source: Oil well/gas well | ||
| Direction from well: | Distance: 0 ft | |
| Lithologic Log
(Log data entered by KGS.) | ||
| From: 0 ft. to 2 ft. | surface | |
| From: 2 ft. to 30 ft. | sandy clay | |
| From: 30 ft. to 62 ft. | fine sand | |
| From: 62 ft. to 80 ft. | 10% clay- 90% med to large sand | |
| From: 80 ft. to 98 ft. | sandy clay | |
| From: 98 ft. to 123 ft. | med to large sand | |
| From: 123 ft. to 196 ft. | sandy clay | |
| From: 196 ft. to 220 ft. | fine sand | |
| From: 220 ft. to 254 ft. | sandy clay | |
| From: 254 ft. to 260 ft. | 50% clay- 50% sandy clay | |
| From: 260 ft. to 358 ft. | sandy clay | |
| From: 358 ft. to 400 ft. | 20% clay- 80% med to large sand | |