|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: EMC Trust | Status: Constructed | ||
| Location: T26S, R43W, Sec. 33, SW SW NE NE | County: Hamilton | ||
| Directions: from Syracuse, 11 mi SW | |||
| Latitude: 37.749446 | Longitude: -102.0200486 | Datum NAD 27 | |
| Latitude: 37.74946 | Longitude: -102.02051 | Datum NAD 83 | |
| Longitude and latitude from GPS measurements. | |||
| GPS Latitude: 37.74946 | GPS Longitude: -102.02051 | Datum WGS84 | |
| View well on interactive map | |||
| General Info | ||
| Well Depth: 770 ft. | Elevation: 3578 ft. | |
| Static Water Level: 300 ft. | Est. Yield: 992 gpm. | |
| Comp. Date: 20-Sep-2012 | Well Use: Irrigation | |
| DWR Applic. #: 22036 | Other ID: | |
| Links | |
| No Wizard information available. | |
| View info from WIMAS Water Right Data base... | |
| Driller Info | ||
| Driller: Hydro Resources Mid Continent, Inc. | License #: 145 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: Yes | ||
| Ground water encountered: 770 ft. | ||
| Pump test data: Well water was 364 ft after 4 hours pumping 992 gpm | ||
| Bore hole diameter: 24 inches to 770 ft | ||
| Casing Info | ||
| Casing Type: Steel
Casing Joints: Welded |
Diam: 16 in. to 765 ft | |
| Casing height above land surface: 12 in
Casing Weight: 42.09 lbs/ft Wall thickness or gauge no.: .250 | ||
| Screen and Perforation Info | ||
| Screen Type: Steel | Screen Openings: Continuous slot | |
| Screen-perforated intervals | From: 341 ft to 421 ft
From: 495 ft to 765 ft | |
| Gravel pack intervals | From: 20 ft to 770 ft | |
| Grout Info | ||
| Grout used: Bentonite | From: 0 to 20 ft | |
| Source of Possible Contamination | ||
| Source: Abandoned water well | ||
| Direction from well: NE | Distance: 76 ft | |
| Lithologic Log
(Log data entered from KOLAR.) | ||
| From: 0 ft. to 2 ft. | Top soil, sandy | |
| From: 2 ft. to 14 ft. | Fine sand | |
| From: 14 ft. to 21 ft. | Brown sandy clay | |
| From: 21 ft. to 35 ft. | Sand, fine to medium coarse | |
| From: 35 ft. to 80 ft. | Brown sandy clay with couple sand beds | |
| From: 80 ft. to 142 ft. | Brown sandy clay | |
| From: 142 ft. to 161 ft. | Brown sandy clay with some fine sand strips | |
| From: 161 ft. to 172 ft. | Sand, fine to medium | |
| From: 172 ft. to 181 ft. | Brown sandy clay | |
| From: 181 ft. to 190 ft. | Sand, fine to medium coarse | |
| From: 190 ft. to 238 ft. | Sand, fine to medium with couple clay ledges | |
| From: 238 ft. to 280 ft. | Sand, fine to medium coarse | |
| From: 280 ft. to 331 ft. | Sand, fine to medium to medium coarse with brown and tan rock, used water | |
| From: 331 ft. to 338 ft. | Brown sandy clay | |
| From: 338 ft. to 370 ft. | Sand, fine to medium coarse with brown and tan rock, small gravel, used water | |
| From: 370 ft. to 410 ft. | Sandstone with couple soapstone strips, used water | |
| From: 410 ft. to 421 ft. | Sandstone with some soapstone, used water, drilled little tight | |
| From: 421 ft. to 493 ft. | Shale, very hard from 490 to 493 feet | |
| From: 493 ft. to 551 ft. | Sandstone, used water, drilled loose in places | |
| From: 551 ft. to 600 ft. | Sandstone, used water, drilled little tight | |
| From: 600 ft. to 640 ft. | Sandstone, used water, drilled loose in places, couple red clay strips | |
| From: 640 ft. to 669 ft. | Sandstone, used water, drilled little tight in places | |
| From: 669 ft. to 740 ft. | Sandstone, used water, drilled loose in places | |
| From: 740 ft. to 765 ft. | Sandstone and red bed mix | |
| From: 765 ft. to 780 ft. | Red bed | |