|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: Bornholt, John | Status: Constructed | ||
| Location: T22S, R6W, Sec. 10, NE SE SE SE | County: Reno | ||
| Directions: 88303 N Hendricks, Hutchinson | |||
| Latitude: 38.145547 | Longitude: -97.959698 | Datum NAD 27 | |
| Latitude: 38.14556 | Longitude: -97.96003 | Datum NAD 83 | |
| Longitude and latitude from GPS measurements. | |||
| GPS Latitude: 38.14556 | GPS Longitude: -97.96003 | Datum NAD83 | |
| View well on interactive map | |||
| General Info | ||
| Well Depth: 42 ft. | Elevation: 1674 ft. | |
| Static Water Level: 20 ft. | Est. Yield: 7 gpm. | |
| Comp. Date: 05-Jun-2014 | Well Use: Geothermal, Open Loop, Surface Discharge | |
| DWR Applic. #: | Other ID: | |
| Driller Info | ||
| Driller: Miller Drilling | License #: 447 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: Yes | ||
| Ground water encountered: 23 ft. | ||
| Pump test data: Well water was 40 ft after 2 hours pumping 7 gpm | ||
| Bore hole diameter: 10 inches to 43 ft | ||
| Casing Info | ||
| Casing Type: PVC
Casing Joints: Glued |
Diam: 5 in. to 42 ft | |
| Casing height above land surface: 12 in
Casing Weight: lbs/ft Wall thickness or gauge no.: SDR26 | ||
| Screen and Perforation Info | ||
| Screen Type: PVC | Screen Openings: Saw cut | |
| Screen-perforated intervals | From: 22 ft to 42 ft | |
| Gravel pack intervals | From: 20 ft to 43 ft | |
| Grout Info | ||
| Grout used: Bentonite | From: 3 to 20 ft | |
| Source of Possible Contamination | ||
| Source: | ||
| Direction from well: | Distance: ft | |
| Lithologic Log
(Log data entered from KOLAR.) | ||
| From: 0 ft. to 5 ft. | Silty F Sand | |
| From: 5 ft. to 23 ft. | Br and Gr Clay | |
| From: 23 ft. to 38 ft. | F Sand and Layers Clay | |
| From: 38 ft. to 43 ft. | Br Clay | |