|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: Equus Beds GMD 2 | Status: Constructed | ||
| Location: T26S, R1E, Sec. 19, NE SE SW | County: Sedgwick | ||
| Directions: Miles Sand Co., 4852 N Meridian, Wichita, 0.75 mi S of 53rd St N and 0.5 mi E of Meridian, east side of lake | |||
| Latitude: 37.7690164 | Longitude: -97.3637787 | Datum NAD 27 | |
| Latitude: 37.7690287 | Longitude: -97.3641009 | Datum NAD 83 | |
| Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
| View well on interactive map | |||
| General Info | ||
| Well Depth: 28.5 ft. | Elevation: 1328 ft. | |
| Static Water Level: 17 ft. | Est. Yield: gpm. | |
| Comp. Date: 20-Jun-1991 | Well Use: Monitoring well/observation/piezometer | |
| DWR Applic. #: | Other ID: MW EB 131A | |
| Driller Info | ||
| Driller: Harp Well & Pump Service, Inc. | License #: 236 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
| Ground water encountered: 0 ft. , 0 ft. , 0 ft. | ||
| Pump test data: Well water was 0 ft after 0 hours pumping 0 gpm | ||
| Casing Info | ||
| Casing Type: PVC
Casing Joints: |
Diam: 2 in. to 23 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
| Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: | ||
| Screen and Perforation Info | ||
| Screen Type: PVC | Screen Openings: Saw cut | |
| Screen-perforated intervals | From: 23 ft to 28 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
| Gravel pack intervals | From: ft to ft | |
| Grout Info | ||
| Grout used: Bentonite | From: 0 to 12 ft
From: 0 to 0 ft From: 0 to 0 ft | |
| Source of Possible Contamination | ||
| Source: OTHER | ||
| Direction from well: | Distance: 0 ft | |
| Lithologic Log
(Log data entered by KGS.) | ||
| From: 0 ft. to 3 ft. | Dark brown sandy silt. Quartz grains range from 0.1 and smaller to 0.2 mm. Lightly stained with iron oxide. Grains angular to rounded. Non calcareous. Less than 0.5% mica. Lightens below 18 inch. | |
| From: 3 ft. to 8 ft. | Yellow to tan poorly sorted sand-pebble mixture. Predominately quartz, less 1% each mica and feldspar. Smaller grains angular to subangular. Larger round to sub-rd and frosted. | |
| From: 8 ft. to 13 ft. | Tan quartz sand ranging from 0.5 to 2 mm. Angular to sub-rd, frosted to transparent, pebbles to 18 mm, composed of granite, quartz sandstone. | |
| From: 13 ft. to 18 ft. | Tan quartz sand predominates, 0.25 to 1.5 mm. Chert and quartz pebbles to 14 mm less than 5% by volume. Less than 1% ang. black-coated grains, either manganese or iron stain | |
| From: 18 ft. to 23 ft. | Tan quartz sand predominates, 0.25 to 1.5 mm. Chert and quartz pebbles to 14 mm less than 5% by volume. Less than 1% ang. black-coated grains, either manganese or iron stain | |
| From: 23 ft. to 28 ft. | Similar to 18-23 feet, fewer pebbles, sand-size fraction increasing. | |
| From: 28 ft. to 33 ft. | Well sorted light tan angular to rounded quartz sand, avg. 0.25 to 1 mm. Fewer pebbles. A few 0.2 mm diameter mica flakes. | |