|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: Equus Beds GMD 2 | Status: Constructed | ||
| Location: T26S, R1W, Sec. 12, SW SW SE | County: Sedgwick | ||
| Directions: 2 mi S of Valley Center on Meridian, 0.5 mi W on 61st St N, 5 feet W of fence and 30 feet N of 61st St | |||
| Latitude: 37.7968864 | Longitude: -97.3795378 | Datum NAD 27 | |
| Latitude: 37.7968986 | Longitude: -97.3798593 | Datum NAD 83 | |
| Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
| View well on interactive map | |||
| General Info | ||
| Well Depth: 30 ft. | Elevation: ft. | |
| Static Water Level: 17 ft. | Est. Yield: gpm. | |
| Comp. Date: 20-Jun-1991 | Well Use: Monitoring well/observation/piezometer | |
| DWR Applic. #: | Other ID: EB 122A | |
| Links | |
| View info from Wizard Water Level Data base... | |
| No WIMAS information available. | |
| Driller Info | ||
| Driller: Harp Well & Pump Service, Inc. | License #: 236 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
| Ground water encountered: 0 ft. , 0 ft. , 0 ft. | ||
| Pump test data: Well water was 0 ft after 0 hours pumping 0 gpm | ||
| Casing Info | ||
| Casing Type: PVC
Casing Joints: |
Diam: 2 in. to 25 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
| Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: | ||
| Screen and Perforation Info | ||
| Screen Type: PVC | Screen Openings: Saw cut | |
| Screen-perforated intervals | From: 25 ft to 30 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
| Gravel pack intervals | From: ft to ft | |
| Grout Info | ||
| Grout used: Bentonite | From: 0 to 19 ft
From: 0 to 0 ft From: 0 to 0 ft | |
| Source of Possible Contamination | ||
| Source: Oil well/gas well | ||
| Direction from well: | Distance: 0 ft | |
| Lithologic Log
(Log data entered by KGS.) | ||
| From: 0 ft. to 3 ft. | loamy sandy silty, angular to subrounded, quartz grains 90% are less than .25 mm diameter, few less than 1% to 1 mm, organic debris, dark-chestnut brown, non calcareous | |
| From: 3 ft. to 8 ft. | fine quartz sand from .125 to 1 mm, angular to subrounded, 1-2% rounded, water-worn quartz and igneous rock pebbles to 10 mm, some black-stained grains poss. manganese stain, non calcareous | |
| From: 8 ft. to 13 ft. | fine quartz sand from .125 to 1 mm, few larger pieces to 13 mm, water-worn quartz and igneous rock pebbles to 10 mm, some black-stained grains poss. manganese stain, non calcareous | |
| From: 13 ft. to 18 ft. | fine quartz sand from .125 to 1 mm, few larger pieces to 13 mm, possible authigenic quartz, one-half quartz grains are lightly coated with ferric oxide, non calcareous | |
| From: 18 ft. to 23 ft. | quartz sand, 90% 0.5 to 1 mm; 5% are larger, rounded, water-worn quartz pebbles to 14 mm long axis, some chert pebbles to 5-10 mm, one-half iron stained, angular to subround, non calcareous | |
| From: 23 ft. to 28 ft. | quartz sand, 90% 0.5 to 1 mm, chert and igneous rock pebbles to 18 x 12 mm, average sand 0.5 to 1 mm, ferromagnesian xl incl in quartz pebbles, non calcareous | |
| From: 28 ft. to 33 ft. | possible 20% of sand grains up to 2 mm, rounded to subangular, some feldspar and granitic grains, larger pebbles to 10-15 mm, subangular to subround, non calcareous | |