|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: Cessna Aircraft Co. | Status: Constructed | ||
| Location: T28S, R1W, Sec. 3, SW NW SE | County: Sedgwick | ||
| Directions: from boiler house at Cessna, Wichita: 15' W | |||
| Latitude: 37.6411659 | Longitude: -97.4150373 | Datum NAD 27 | |
| Latitude: 37.6411809 | Longitude: -97.4153611 | Datum NAD 83 | |
| Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
| View well on interactive map | |||
| General Info | ||
| Well Depth: 123 ft. | Elevation: ft. | |
| Static Water Level: 30.2 ft. | Est. Yield: 622 gpm. | |
| Comp. Date: 01-Apr-1992 | Well Use: Industrial | |
| DWR Applic. #: | Other ID: | |
| Links | |
| No Wizard information available. | |
| View info from WIMAS Water Right Data base... | |
| Driller Info | ||
| Driller: Layne-Christensen Co. | License #: 102 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
| Ground water encountered: 30 ft. , 0 ft. , 0 ft. | ||
| Pump test data: Well water was 0 ft after 0 hours pumping 0 gpm | ||
| Casing Info | ||
| Casing Type: Steel
Casing Joints: |
Diam: 12 in. to 0 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
| Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: | ||
| Screen and Perforation Info | ||
| Screen Type: Stainless Steel | Screen Openings: Wire wrapped | |
| Screen-perforated intervals | From: 93 ft to 123 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
| Gravel pack intervals | From: ft to ft | |
| Grout Info | ||
| Grout used: Cement grout | From: 7 to 27 ft
From: 0 to 0 ft From: 0 to 0 ft | |
| Source of Possible Contamination | ||
| Source: OTHER | ||
| Direction from well: | Distance: 0 ft | |
| Lithologic Log
(Log data entered by KGS.) | ||
| From: 0 ft. to 2 ft. | top soil | |
| From: 2 ft. to 4 ft. | fine sand | |
| From: 4 ft. to 18 ft. | rusty tan fine to coarse with orange-tan clay layers | |
| From: 18 ft. to 35 ft. | fine to medium brown sand | |
| From: 35 ft. to 41 ft. | fine to medium brown sand | |
| From: 41 ft. to 50 ft. | yellowish tan clay shale base | |
| From: 50 ft. to 59 ft. | yellowish tan clay shale base | |
| From: 59 ft. to 65 ft. | fine to medium brown sand | |
| From: 65 ft. to 80 ft. | fine to medium brown sand | |
| From: 80 ft. to 95 ft. | fine to medium brown sand | |
| From: 95 ft. to 110 ft. | fine to medium brown sand | |
| From: 110 ft. to 128 ft. | fine to medium brown sand | |
| From: 128 ft. to ft. | gray shale | |