|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: McCoy Petroleum/Jim and Kay Wilder | Status: Constructed | ||
| Location: T31S, R35W, Sec. 36, NE NW NW | County: Stevens | ||
| Directions: from Woods, 10 mi N, 1.5 mi E, and S to site | |||
| Latitude: 37.3139017 | Longitude: -101.0821487 | Datum NAD 27 | |
| Latitude: 37.3139258 | Longitude: -101.0825902 | Datum NAD 83 | |
| Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
| View well on interactive map | |||
| General Info | ||
| Well Depth: 480 ft. | Elevation: ft. | |
| Static Water Level: 230 ft. | Est. Yield: gpm. | |
| Comp. Date: 31-Jul-1989 | Well Use: Oil Field Water Supply | |
| DWR Applic. #: T89-349 | Other ID: Clift 1-36 | |
| Links | |
| No Wizard information available. | |
| View info from WIMAS Water Right Data base... | |
| Driller Info | ||
| Driller: Bernard E. Carlile Water Well Service, Inc. | License #: 118 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
| Ground water encountered: 230 ft. , 0 ft. , 0 ft. | ||
| Pump test data: Well water was 0 ft after 0 hours pumping 0 gpm | ||
| Casing Info | ||
| Casing Type: PVC
Casing Joints: |
Diam: 6 in. to 320 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
| Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: | ||
| Screen and Perforation Info | ||
| Screen Type: PVC | Screen Openings: Saw cut | |
| Screen-perforated intervals | From: 320 ft to 480 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
| Gravel pack intervals | From: ft to ft | |
| Grout Info | ||
| Grout used: Neat cement, Bentonite | From: 0 to 3 ft
From: 3 to 22 ft From: 300 to 310 ft | |
| Source of Possible Contamination | ||
| Source: Oil well/gas well | ||
| Direction from well: | Distance: 0 ft | |
| Lithologic Log
(Log data entered by KGS.) | ||
| From: 0 ft. to 2 ft. | surface | |
| From: 2 ft. to 45 ft. | 70% clay, 30% sandy clay | |
| From: 45 ft. to 90 ft. | 60% clay, 40% sandy clay | |
| From: 90 ft. to 110 ft. | 80% rusty clay, 20% sandy clay, trace of medium/large sand | |
| From: 110 ft. to 140 ft. | 80% white clay, 20% sandy clay | |
| From: 140 ft. to 190 ft. | 20% fine sand, 80% medium/large sand | |
| From: 190 ft. to 210 ft. | 10% clay, 70% medium/large sand, 20% sandy clay | |
| From: 210 ft. to 250 ft. | 80% medium/large sand, 20% sandy clay | |
| From: 250 ft. to 280 ft. | 30% clay, 70% sandy clay, trace medium/large sand | |
| From: 280 ft. to 310 ft. | 10% clay, 90% tan sandy clay, trace medium/large sand | |
| From: 310 ft. to 370 ft. | 20% clay, 20% medium/large sand, 60% rust sandy clay | |
| From: 370 ft. to 390 ft. | 10% medium/large sand, 90% sandy clay | |
| From: 390 ft. to 410 ft. | 50% medium/large sand, 50% sandy clay | |
| From: 410 ft. to 440 ft. | 60% medium/large sand, 40% sandy clay | |
| From: 440 ft. to 450 ft. | 50% medium/large sand, 50% sandy clay | |
| From: 450 ft. to 480 ft. | 30% clay, 30% medium/large sand, 40% sandy clay | |