Specific Water Well Detail | ||
Location Info | |||
Owner: Oxy USA, Inc./Glenn Tuttle | Status: Constructed | ||
Location: T31S, R38W, Sec. 10, NE SW NW | County: Stevens | ||
Directions: From Moscow, 13 miles West on blacktop, 0.5 mile North, 1.5 miles West, 0.5 mile North, across river, 3 miles North, 1.5 miles East, and SE to site | |||
Latitude: 37.3691544 | Longitude: -101.444193 | Datum NAD 27 | |
Latitude: 37.3691772 | Longitude: -101.4446332 | Datum NAD 83 | |
Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
View well on interactive map |
General Info | ||
Well Depth: 320 ft. | Elevation: ft. | |
Static Water Level: 120 ft. | Est. Yield: 100 gpm. | |
Comp. Date: 29-Jun-1989 | Well Use: Oil Field Water Supply | |
DWR Applic. #: | Other ID: MLP Tuttle A-1 |
Links | |
No Wizard information available. | |
View info from WIMAS Water Right Data base... |
Driller Info | ||
Driller: Bernard E. Carlile Water Well Service, Inc. | License #: 118 |
Scanned Form | |
View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. |
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
Ground water encountered: 120 ft. , 0 ft. , 0 ft. | ||
Pump test data: Well water was 0 ft after 0 hours pumping 0 gpm | ||
Casing Info | ||
Casing Type: PVC
Casing Joints: |
Diam: 5 in. to 200 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: |
Screen and Perforation Info | ||
Screen Type: PVC | Screen Openings: Saw cut | |
Screen-perforated intervals | From: 200 ft to 320 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
Gravel pack intervals | From: ft to ft |
Grout Info | ||
Grout used: Neat cement, Bentonite | From: 0 to 3 ft
From: 3 to 21 ft From: 162 to 172 ft |
Source of Possible Contamination | ||
Source: Oil well/gas well | ||
Direction from well: | Distance: 0 ft |
Lithologic Log
(Log data entered by KGS.) | ||
From: 0 ft. to 3 ft. | surface | |
From: 3 ft. to 32 ft. | tan sandy clay | |
From: 32 ft. to 55 ft. | red clay | |
From: 55 ft. to 90 ft. | red sandy clay | |
From: 90 ft. to 110 ft. | 50% red clay, 50% sandy clay | |
From: 110 ft. to 200 ft. | sandy clay | |
From: 200 ft. to 225 ft. | 50% fine sand, 50% tan sandy clay | |
From: 225 ft. to 250 ft. | 20% fine sand, 70% medium/large sand, 10% tan sandy clay | |
From: 250 ft. to 275 ft. | 30% fine sand, 70% medium/large sand | |
From: 275 ft. to 300 ft. | 30% fine sand, 70% medium/large sand | |
From: 300 ft. to 320 ft. | 40% clay, 20% medium/large sand, 40% sandy clay |