|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: Arco Oil and Gas/Terry Campbell | Status: Constructed | ||
| Location: T33S, R35W, Sec. 13, NW SW SW | County: Stevens | ||
| Directions: From Woods, 1 mile East and North into site | |||
| Latitude: 37.1728299 | Longitude: -101.0838337 | Datum NAD 27 | |
| Latitude: 37.1728547 | Longitude: -101.0842749 | Datum NAD 83 | |
| Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
| View well on interactive map | |||
| General Info | ||
| Well Depth: 350 ft. | Elevation: ft. | |
| Static Water Level: 140 ft. | Est. Yield: 75 gpm. | |
| Comp. Date: 11-Dec-1986 | Well Use: Oil Field Water Supply | |
| DWR Applic. #: T86-400 | Other ID: Campbell 1 A-2 | |
| Driller Info | ||
| Driller: Bernard E. Carlile Water Well Service, Inc. | License #: 118 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
| Ground water encountered: 210 ft. , 0 ft. , 0 ft. | ||
| Pump test data: Well water was 0 ft after 0 hours pumping 0 gpm | ||
| Casing Info | ||
| Casing Type: PVC
Casing Joints: |
Diam: 5 in. to 260 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
| Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: | ||
| Screen and Perforation Info | ||
| Screen Type: PVC | Screen Openings: Saw cut | |
| Screen-perforated intervals | From: 260 ft to 350 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
| Gravel pack intervals | From: ft to ft | |
| Grout Info | ||
| Grout used: Neat cement | From: 0 to 10 ft
From: 0 to 0 ft From: 0 to 0 ft | |
| Source of Possible Contamination | ||
| Source: Oil well/gas well | ||
| Direction from well: | Distance: 0 ft | |
| Lithologic Log
(Log data entered by KGS.) | ||
| From: 0 ft. to 2 ft. | surface | |
| From: 2 ft. to 140 ft. | sandy clay | |
| From: 140 ft. to 160 ft. | 30% medium to large sand and 70% fine sand | |
| From: 160 ft. to 240 ft. | fine sand 10%, 70% medium to large sand and 20% sandy clay | |
| From: 240 ft. to 280 ft. | medium to large sand | |
| From: 280 ft. to 300 ft. | 20% clay, 50% medium to large sand and 30% sandy clay | |
| From: 300 ft. to 340 ft. | medium to large sand | |