|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: Oxy USA, Inc./Sid Thomas | Status: Constructed | ||
| Location: T34S, R35W, Sec. 7, SW SW SW | County: Stevens | ||
| Directions: From Liberal, 3.13 miles North and 13.75 miles West | |||
| Latitude: 37.0984888 | Longitude: -101.1741851 | Datum NAD 27 | |
| Latitude: 37.0985142 | Longitude: -101.174625 | Datum NAD 83 | |
| Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
| View well on interactive map | |||
| General Info | ||
| Well Depth: 472 ft. | Elevation: ft. | |
| Static Water Level: 192 ft. | Est. Yield: 100 gpm. | |
| Comp. Date: 19-Oct-1988 | Well Use: Oil Field Water Supply | |
| DWR Applic. #: T88-511 | Other ID: Mills C 2 | |
| Links | |
| No Wizard information available. | |
| View info from WIMAS Water Right Data base... | |
| Driller Info | ||
| Driller: Bernard E. Carlile Water Well Service, Inc. | License #: 118 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
| Ground water encountered: 0 ft. , 0 ft. , 0 ft. | ||
| Pump test data: Well water was 215 ft after 2 hours pumping 100 gpm | ||
| Casing Info | ||
| Casing Type: PVC
Casing Joints: |
Diam: 5 in. to 292 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
| Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: | ||
| Screen and Perforation Info | ||
| Screen Type: PVC | Screen Openings: Saw cut | |
| Screen-perforated intervals | From: 292 ft to 472 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
| Gravel pack intervals | From: ft to ft | |
| Grout Info | ||
| Grout used: Neat cement, Bentonite | From: 5 to 7 ft
From: 7 to 27 ft From: 150 to 160 ft | |
| Source of Possible Contamination | ||
| Source: Oil well/gas well | ||
| Direction from well: | Distance: 0 ft | |
| Lithologic Log
(Log data entered by KGS.) | ||
| From: 0 ft. to 2 ft. | surface | |
| From: 2 ft. to 52 ft. | fine sand | |
| From: 52 ft. to 63 ft. | sandy clay | |
| From: 63 ft. to 95 ft. | 40% medium to large sand, 60% sandy clay | |
| From: 95 ft. to 113 ft. | 70% medium to large sand, 30% gravel | |
| From: 113 ft. to 132 ft. | 70% clay - 30% sandy clay | |
| From: 132 ft. to 177 ft. | sandy clay | |
| From: 177 ft. to 198 ft. | 40% white clay - 60% sandy clay | |
| From: 198 ft. to 224 ft. | white clay | |
| From: 224 ft. to 258 ft. | 20% clay - 80% fine sand | |
| From: 258 ft. to 272 ft. | sandy clay | |
| From: 272 ft. to 352 ft. | 20% fine sand - 80% sandy clay | |
| From: 352 ft. to 364 ft. | 30% blue shale - 60% sandy clay - 10% yellow sandstone | |
| From: 364 ft. to 372 ft. | 10% white clay - 15% blue shale - 75% yellow sandstone | |
| From: 372 ft. to 385 ft. | 80% white fine sand - 20% yellow sandstone | |
| From: 385 ft. to 428 ft. | white fine sand | |
| From: 428 ft. to 432 ft. | 80% white fine sand - 20% yellow sandstone | |
| From: 432 ft. to 472 ft. | 90% fine sand - 10% yellow sandy stone | |