|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: Phillips Petroleum Co. | Status: Constructed | ||
| Location: T11S, R25E, Sec. 2, SW NW NE NW | County: Wyandotte | ||
| Directions: Donovan and Industrial Blvd, Kansas City | |||
| Latitude: 39.127454 | Longitude: -94.6066488 | Datum NAD 27 | |
| Latitude: 39.1274579 | Longitude: -94.606883 | Datum NAD 83 | |
| Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
| View well on interactive map | |||
| General Info | ||
| Well Depth: 61.4 ft. | Elevation: 740 ft. | |
| Static Water Level: 11.4 ft. | Est. Yield: 200 gpm. | |
| Comp. Date: 10-Sep-1984 | Well Use: Industrial | |
| DWR Applic. #: | Other ID: 1 water | |
| Links | |
| No Wizard information available. | |
| View info from WIMAS Water Right Data base... | |
| Driller Info | ||
| Driller: Layne-Christensen Co. | License #: 102 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
| Ground water encountered: 11 ft. , 0 ft. , 0 ft. | ||
| Pump test data: Well water was 38 ft after 2 hours pumping 457 gpm | ||
| Casing Info | ||
| Casing Type: Steel
Casing Joints: |
Diam: 20 in. to 41 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
| Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: | ||
| Screen and Perforation Info | ||
| Screen Type: Stainless Steel | Screen Openings: Wire wrapped | |
| Screen-perforated intervals | From: 41 ft to 61 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
| Gravel pack intervals | From: ft to ft | |
| Grout Info | ||
| Grout used: Cement grout | From: 0 to 14 ft
From: 0 to 0 ft From: 0 to 0 ft | |
| Source of Possible Contamination | ||
| Source: Fuel storage | ||
| Direction from well: | Distance: 0 ft | |
| Lithologic Log
(Log data entered by KGS.) | ||
| From: 0 ft. to 1 ft. | gravel fill | |
| From: 1 ft. to 5 ft. | gray clay silt, medium | |
| From: 5 ft. to 15 ft. | gray clay silt, very soft | |
| From: 15 ft. to 16.5 ft. | gray clay silt, very soft | |
| From: 16.5 ft. to 18 ft. | gray sandy silt | |
| From: 18 ft. to 20 ft. | gray fine to very fine sand | |
| From: 20 ft. to 21.5 ft. | gray fine to very fine sand | |
| From: 21.5 ft. to 25 ft. | gray fine to very fine sand | |
| From: 25 ft. to 26.5 ft. | gray fine to very fine sand | |
| From: 26.5 ft. to 27.5 ft. | gray fine to very fine sand | |
| From: 27.5 ft. to 30 ft. | gray fine to very fine sand with trace clay | |
| From: 30 ft. to 31.5 ft. | gray fine to very fine sand | |
| From: 31.5 ft. to 33 ft. | gray fine to very fine sand | |
| From: 33 ft. to 35 ft. | gray very fine with fine sand | |
| From: 35 ft. to 36.5 ft. | gray very fine with fine sand | |
| From: 36.5 ft. to 40 ft. | gray very fine with fine sand | |
| From: 40 ft. to 41.5 ft. | gray very fine with fine sand | |
| From: 41.5 ft. to 43 ft. | gray very fine with fine sand | |
| From: 43 ft. to 45 ft. | gray medium to fine sand with trace boulders | |
| From: 45 ft. to 46.5 ft. | gray medium to fine sand with trace boulders | |
| From: 46.5 ft. to 49 ft. | gray medium to fine sand with trace coarse | |
| From: 49 ft. to 50 ft. | gray fine to very fine sand | |
| From: 50 ft. to 51.5 ft. | gray fine to very fine sand | |
| From: 51.5 ft. to 53 ft. | gray fine to very fine sand with boulders | |
| From: 53 ft. to 60 ft. | limestone boulders with some medium sand | |
| From: 60 ft. to 60.5 ft. | limestone, hard | |