|
|
|
Specific Water Well Detail |
|
|
| Location Info | |||
| Owner: Deffenbaugh Industries | Status: Constructed | ||
| Location: T28S, R25E, Sec. 2, SE SW SW | County: Crawford | ||
| Directions: from Arcadia, 0.5 mi W | |||
| Latitude: 37.6305947 | Longitude: -94.6452416 | Datum NAD 27 | |
| Latitude: 37.6306399 | Longitude: -94.6454795 | Datum NAD 83 | |
| Longitude and latitude calculated by Survey from township-range-section-quarter calls. Only good to within the quarter call accuracy. | |||
| View well on interactive map | |||
| General Info | ||
| Well Depth: 70 ft. | Elevation: ft. | |
| Static Water Level: 44.53 ft. | Est. Yield: gpm. | |
| Comp. Date: 11-Jul-1994 | Well Use: Monitoring well/observation/piezometer | |
| DWR Applic. #: | Other ID: MW 7 | |
| Driller Info | ||
| Driller: Defenbaugh Industries, Inc. (T.E.S.T.) | License #: 483 | |
| Scanned Form | |
| View scan of this form in PDF format. | |
You will need the Acrobat PDF Reader, available free from Adobe, to read this file. | |
|
Chemical Sample Submitted?: No
Water Well disinfected?: | ||
| Ground water encountered: 0 ft. , 0 ft. , 0 ft. | ||
| Pump test data: Well water was 0 ft after 0 hours pumping 0 gpm | ||
| Casing Info | ||
| Casing Type: PVC
Casing Joints: |
Diam: 2 in. to 64.5 ft
Diam: 0 in. to 0 ft Diam: 0 in. to 0 ft | |
| Casing height above land surface: in
Casing Weight: lbs/ft Wall thickness or gauge no.: | ||
| Screen and Perforation Info | ||
| Screen Type: PVC | Screen Openings: Mill slot | |
| Screen-perforated intervals | From: 64.5 ft to 70 ft
From: 0 ft to 0 ft From: 0 ft to 0 ft | |
| Gravel pack intervals | From: ft to ft | |
| Grout Info | ||
| Grout used: Bentonite | From: 2 to 57.6 ft
From: 57.6 to 61.2 ft From: 0 to 0 ft | |
| Source of Possible Contamination | ||
| Source: OTHER | ||
| Direction from well: | Distance: 0 ft | |
| Lithologic Log
(Log data entered by KGS.) | ||
| From: 0 ft. to 7 ft. | clay, tan orange, stiff, with sand and gravel, moist | |
| From: 7 ft. to 13.7 ft. | mine spoil, gray to light tan, poorly sorted, fine-very coarse, angular-subangular, with gravel | |
| From: 13.7 ft. to 17.4 ft. | weathered shale, gray, iron stains, coal seams and 1/2-inch wackestone inclusions, gray, sandy, hard, micaceous | |
| From: 17.4 ft. to 30 ft. | shale, gray, hard, fresh, thinly laminated, micaceous, grading weathered with clay and iron stains | |
| From: 30 ft. to 32.5 ft. | weathered clay, gray, reworked, soft, iron stains, gravel-sized wackestone fragments in clay matrix | |
| From: 32.5 ft. to 34.5 ft. | wackestone, gray, sandy, hard | |
| From: 34.5 ft. to 39 ft. | weathered shale, gray, firm to stiff | |
| From: 39 ft. to 39.5 ft. | coal seam | |
| From: 39.5 ft. to 40.4 ft. | silt parting, black, wavy bedding | |
| From: 40.4 ft. to 45 ft. | underclay, dark gray to light gray | |
| From: 45 ft. to 66 ft. | shale, gray green, argillaceous, hard, mud seams, iron nodules, bituminous partings at 47 feet, dark gray at 50 feet, fractures and mud seams | |
| From: 66 ft. to 67.5 ft. | mudstone, brown, ferruginous, calcite-healed veins | |
| From: 67.5 ft. to ft. | shale, black, hard, fresh, thinly laminated | |