|
Digital Petroleum Atlas |
![]() |
| Jennings Field Oil & Gas Data | |||
|---|---|---|---|
|
|
|
|
General Field Information | |
| Exploration Method: | The combination of a reconnaissance seismograph revealing an anomaly in the area and the subsurface geology resulted in the drilling of the discovery well. |
|---|---|
| Drilling Casing Practices: | Production string was set to the bottom and each zone was selectively perforated and acidized. An average of 700 feet of surface casing was set in each well. |
Discovery Well(s) |
|---|
| Well Location: | NW NW SE 25-T4S-R27W |
|---|---|
| Rotary Total Depth: | 3925 |
| Production Zone: | Lansing - Kansas City Supergroup |
| Initial Oil Potential: | 162 BOPD |
| Initial Formation Pressure: | 1100 |
| Perforations: | 3478 - 3482 Lansing |
| Comments: | Gravity: 35 degrees |
| Data Source: | KOGF, Vol. II; DISCOVERY 894 |
| Well Location: | SE SE NW 25-T4S-R27W |
|---|---|
| Rotary Total Depth: | 3586 |
| Production Zone: | WABAUNSEE OIL |
| Initial Oil Potential: | 151 BOPD |
| Perforations: | 3156' - 3162' Howard limestone (Wabaunsee) |
| Data Source: | KOGF, Vol. II; DISCOVERY 7681 |
| Well Location: | NE SE SW 25-T4S-R27W |
|---|---|
| Rotary Total Depth: | 3582 |
| Production Zone: | SHAWNEE OIL |
| Data Source: | DISCOVERY 7682 |
Summary Production Information | |
| Field Size: | 3200 acres |
| Total Wells: | 98 |
| Productive Oil Wells: | 53 as of August 2025 |
| Abandoned Wells: | 20 |
| Cumulative Oil: | 2,783,213.49 bbls as of August 2025 |
Producing Formation:WABAUNSEE |
| Depth Top: | 3156 feet |
| Formation Lithology: | Gray-buff, finely crystalline, fossiliferous limestone |
| Trap Type: | Jennings field is the northernmost producing feature on the Adell-Jennings anticlinal trend. The feature is a small anticline with approximately 30 feet of closure. All production is structurally controlled. |
WABAUNSEE (Wabaunsee Group) |
| Thickness: | 7 feet | Maximum Thickness: | 8 feet |
WABAUNSEE (Wabaunsee Group) |
| Produces Oil: | Yes |
| Average Net Pay: | 6 feet |
| Average Oil Column: | 16 |
| Drive Mechanism: | Water drive and gas solution drive |
| Water Production: | Some wells produced water from their inception. In the late 1950s they were producing about 3 barrels of water for each barrel of oil. The original water lever was -680. |
| Proven Production: | 320 acres | Production Well Spacing: | 10 acres |
WABAUNSEE (Wabaunsee Group) |
| Minimum Oil API Gravity: | 34 | Maximum Oil API Gravity: | 35.8 % |
WABAUNSEE (Wabaunsee Group) |
| Porosity Type: | Six feet of porosity. |
Producing Formation:SHAWNEE |
| Depth Top: | 3295 feet |
SHAWNEE (Shawnee Group) |
| Produces Oil: | Yes |
Producing Formation:LANS.-K.C. |
| Formation Lithology: | Gray-buff, finely crystalline, ooltic limestones |
| Trap Type: | Jennings field is the northernmost producing feature on the Adell-Jennings anticlinal trend. The feature is a small anticline with approximately 30 feet of closure. All production is structurally controlled. |
LANS.-K.C. (Lansing - Kansas City Supergroup) |
| Average Thickness: | 11 feet |
LANS.-K.C. (Lansing - Kansas City Supergroup) |
| Produces Oil: | Yes |
| Average Oil Column: | 11 |
| Drive Mechanism: | Water drive and gas solution drive |
| Water Production: | Some wells produced water from their inception. In the late 1950s they were producing about 3 barrels of water for each barrel of oil. The original water lever was -906. |
| Proven Production: | 160 acres | Production Well Spacing: | 10 acres |
LANS.-K.C. (Lansing - Kansas City Supergroup) |
| Minimum Oil API Gravity: | 34 | Maximum Oil API Gravity: | 35.8 % |
LANS.-K.C. (Lansing - Kansas City Supergroup) |
| Porosity Type: | Each zone has two to six feet of porosity. | Maximum Porosity: | 6 % | Average Porosity: | 4 % |
|
This web page generated by ORACLE PLSQL Stored Procedure gemini.dpa_general_pkg.build_general_web_page()
Comments to webadmin@kgs.ku.edu |